Bedienungsanleitung Wanders Ruby (Seite 32 von 64) (Deutsch, Englisch, Holländisch, Französisch)

694500

Zoom out

Zoom in

Vorherige Seite

1/64

Nächste Seite

extra air supply and enhancing chimney draught. Once the kindling has caught  re you can add extra wood. (Put

the logs loosely on the  re so that the  ames can catch on all around).

How the air valve works

The air slider has three settings, i.e.

1. entirely extended, primary, secondary and tertiary air supply will open.

2. press until  rst click, only secondary and tertiary air supply will open, the stove will now have the highest

e ciency and the window pane rinser will work best

3. press until second click, everything closes and stove will slowly shut down.

It is prohibited to light the stove with liquids like petrol or spirits.

Do not have the cooker hood on in the room where you operate your stove.

Never touch the varnished parts when you heat your stove.

Avoid  nger marks

Do not touch the glass of the stove with your  ngers. Finger marks will burn into the glass and cannot be removed

later.

Lighting the stove for the  rst time

Discolouration of walls, ceilings and grates

The walls, ceilings and grates may show some discolouration after lighting your stove. This is caused by the

dust particles that burn in the convection cover. WANDERS cannot be held responsible for this natural process.

To minimize discolouring we refer to the advice given for atmospheric hearths. Your installer can give you more

information about this.

When you light the Ruby for the  rst time, the hearth must still ‘anneal’ and temper itself. The unit has a heat

resistant lacquer which must burn in the stove at temperatures above 400 °Celsius. This will happen during the

 rst few times of lighting the stove and temperatures rise to 600 °C. Though this may give an unpleasant smell, it

is otherwise harmless. It is advisable to keep the stove burning with limited fuel for at least 6 hours when lighting

the stove for the  rst 4 or 5 times. Air the room well when the stove is burning. Make sure that any cooking hood

is not turned on when the stove is burning; a cooking hood extracts the combustion air that the stove needs.

Some deposit may form on the glass panes of the stove when you ‘anneal’ your hearth. You can easily remove this

deposit with a damp cloth after the stove has cooled down. You can also use some cleansing agent for ceramic

rings. Please make sure you do not leave any  nger marks on the clean glass. Finger marks burn into the glass and

cannot be removed later.

Newly built house or recently renovated?

It is advisable to wait six weeks before lighting the stove in a newly built house that has recently been completed,

or in a space that has recently been renovated drastically. The walls and ceilings still contain gases, softeners and

moisture from plasterwork or paint. The warm air-streams may discolour the dust particles in the space, which

may stick to walls and ceilings. Even the moisture in the walls and ceilings will become warm and may cause

yellow stains.

1 2 3

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Wanders Ruby Seite 32

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info