Bedienungsanleitung Watts Climatic Control Heating and Cooling (Seite 15 von 28) (Englisch)

805499

Zoom out

Zoom in

Vorherige Seite

1/28

Nächste Seite

AUTOMATIC mode of operation

Automatic mode of operation using the built-in or user programs.

The ClimaticControl-HC is controlled according to the selected built-in or user program ( 6.2.).

The flow temperature is controlled depending on the outdoor temperature and the curve with room com-

pensation if RF thermostat is installed. ( 5.3.3 – 5.3.5).

 The room compensation function will be different depending of the RF thermostat installed:

* With WFHTRF-BASIC or LCD (Non programmable thermostat)

The room temperature compensation will be taken in account only during Comfort period of the pro-

gram. During the Reduced period the Water temperature will follow the curve minus the temperature

setback offset.

With

MILUX RF (Programmable

thermostat)

The room temperature compensation will be taken in account during Comfort and Reduced period

of the program. In this case the program of the MILUX RF should be the same of the water program ad-

justed on the CC-HC to have the best optimising energy consumption (the water temperature will be re-

duced due to the CC-HC program (in ) and by the setting temperature reduced also in the room due to

the MILUX RF program.

With MILUX-RF HYGROSTAT (Programmable Heat and Cool thermostat with Humidity supervising)

The program will be now done on the MILUX-RF HYGROSTAT (Program made on Zone1 see the user

guide of the MILUX-RF HYGROSTAT for more explanation).

The room temperature compensation will be taken in account during Comfort and Reduced period

of the MILUX-RF HYGROSTAT program.

The Comfort and Reduced manual offsets added or subtracted to the calculated water temperature will be

always adjusted on the both working mode of the CC-HC ( 0.00°C & -10.0°C by default).

 For the operation of the circulation pump please refer to the section of COMFORT mode of operation.

REDUCED TEMPERATURE mode of operation

Unlimited operation in REDUCED TEMPERATURE mode .

This is a constant mode of operation of the system. The ClimaticControl-HC adjusts the flow temperature

continuously on the basis of outdoor temperature and the selected curve and substracting the value of

temperature setback (factory setting -10.0 К in Heating mode & +3.0 К in Cooling mode).

The display indicates the current flow temperature at 5 and the outside temperature at 13. By pressing the

button (OK) the preset value for the supply flow temperature reduced by the setback in temperature is

displayed at 5 for 3 seconds. Simultaneously the reducing difference appears in 13 (without deviation =

-10.0). It can be changed by the buttons (+) or (-).

 For the operation of the circulation pump please refer to the section of COMFORT mode of operation.

 See the previous part for more explanation concerning the room compensation function when RF

thermostat is installed.

ABSENCE/VACATION mode of operation

Time-limited operation of REDUCED TEMPERTURE mode .

Duration can be set between 1 and 24 hours and up to a maximum of 44 days. When this period is ex-

pired the ClimaticControl-HC switches back to operating mode .

By means of the arrow keys (◄) the cursor is first moved to . Then appears on the display at 13.

The duration of absence can be changed using buttons (+) or (-).

Example:

= 1 hour; = 1 day

Both symbols and start blinking. The remaining time is displayed at 13.

To discontinue this mode of operation before time you have to set the remaining time at 13 to using

the

(

)

key.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Watts Climatic Control Heating and Cooling Seite 15

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info