Bedienungsanleitung Watts Solar Controller LCD PLUS (Seite 5 von 36) (Deutsch, Englisch)

805491

Zoom out

Zoom in

Vorherige Seite

1/36

Nächste Seite

Quick Start menu step by step:

1/ Language choice

- Choose your language with (+) or (-) and press (►) key to

accept.

2/ Time and Date adjustment

- Adjust the hour with (+) or (-) and press (►) key to accept.

- Adjust the minutes and press (►) key to accept and skip to

the next line.

The controller will skip automatically to the date line, you can

now:

- Adjust the month with (+) or (-) and press (►) key to accept.

- Adjust the day number with (+) or (-) and press (►) key to

accept.

- Adjust the Year with (+) or (-) and press (►) key to accept.

The controller will skip automatically to the clock format line, to

allow you to adjust the time format. Alter with (+) and (-) press

(►) key to accept.

It is possible to select if you require Daylight summer time

advance function with (+) and (-) press (►) key to accept.

3/ System choice

Select the required system with (+) or (-) press (►) key to

accept.

Following system selection, you will be prompted to adjust the

selected system parameters. Proceed to adjust the system

values with (+) or (-) press (►) key to accept and continue to

the following step in the configuration.

4/ Output configuration

Select the device connected on the output of your controller

(i.e. standard Pump, PWM pump or 3-way valve) with (+) or (-)

press (►) key to accept and finish the configuration.

N.B.. Depending on the system choice you may be prompted

to configure the P2 output also.

Now your controller is now set-up.

Note:

It is possible to restart the “quick start menu” operation and

follow the steps above to configure again, alternatively it is

possible to directly access a specific parameter throught the

normal menu structure if you have made an error during the

configuration.

2 Services

2.1 Language

- With (+) or (-) select the line “English” and press (►) to

highlight the line.

- Now you can change the language with (+) or (-), you have

the choice between: English, Deutsch, Français, Español,

Italiano, Nederland, Magyarul, and Portugës.

2.2 Time & Date

With (+) or (-) select the line “Time & Date” and press (►)

It is now possible to select the line which requires adjustment

with by pressing (+) or (-), when the correct line is selected

press (►) to highlight the line.

Then use the (+) or (-) to alter the value.

Time,

- Press (►) once to allow adjustment of the hour.

- Press (►) for a second time to allow adjustment of

the minutes.

- Depress (◄) twice to return to the line selection.

 Service --- -

 English -

Time and date

System

Outputs Config.

Inputs Config.

Energy Measurements

Protection func.

 Time & Date --- -

 Time 08:25

Date 02/03/2011

Thursday

24/12H clock 24H

D.S.T. Yes

System

T1 _ _ _°C

T2 _ _ _°C

P1 _ _ _ %

 Pump 1 --- -

 Type Std Pump

Speed Control Yes

Min rev pump 0%

Max rev pump 100%

T1_ _ _°C

T2_ _ _°C

T3_ _ _°C

T4_ _ _°C

P1_ _ _ %

_ _ _ KW

_ _ _ KWh

T1 T4

 Service -

 English

Time and date

System

Outputs Config.

Inputs Config.

Energy Measurements

Protection func.

Degrees °F

Tube collectors No

Factory setting No

Quick Start menu

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Watts Solar Controller LCD PLUS Seite 5

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info