Bedienungsanleitung Webasto Cool Top Trail 28 (Seite 8 von 158) (Deutsch, Englisch, Holländisch, Französisch, Italienisch, Spanisch, Schwedisch)

802133

Zoom out

Zoom in

Vorherige Seite

1/158

Nächste Seite

5 | Installation instructions

8 / 158 9042924B_OI-II_Cool Top Trail 28

11. Do not lay loose or bent cables next to electrically conduct-

ive material (metal).

5.7 CI-BUS Cable(s)

NOTE

This chapter is only applicable if the Cool Top Trail 28

indoor unit is equipped with a CI-BUS unit and this CI-

BUS unit must be connected to an external CI-BUS sys-

tem.

To assemble the CI-BUS cables, follow the instructions in

chapter5.7.1, "CI-BUS cable assembly" on page 8.

Use the appropriate CI-BUS cable to connect the CI-BUS unit to

the CI-BUS system.

If two Cool Top Trail air conditioners are installed, use the CI-

BUS interconnection cable to connect the CI-BUS units.

WARNING

Danger of electrocution

You must make sure that there is no voltage at electric-

ally operated components before working on them.

Make sure that the mains power supply or the power

supplied by inverters is isolated.

Fig.12 CI-BUS cable

NOTE

Malfunctioning of the CI-BUS

Do not lay mains cables, the CI-BUS cable(s) and

12/24V cables together in the same cable duct.

1. Optionally lead the CI-BUS cable through the roof insula-

tion as shown above.

2. Drill a hole in the wooden bar through which to route the

CI-BUS cable.

3. Route the CI-BUS cable through the hole in the wooden bar

before mounting the bar.

4. Attach and lay the cables so that they cannot be tripped

over or damaged.

5. Use cable ducts to route cables through walls with sharp

edges.

6. Do not lay loose or bent cables next to electrically conduct-

ive material (metal).

7. Route the CI-BUS cable to the indoor area of the caravan,

vehicle or motorhome.

8. Route the CI-BUS cable to the Cool Top trail air conditioner.

9. In case of two Cool Top Trail air conditioners route a CI-

BUS interconnection cable between the two CI-BUS units.

5.7.1 CI-BUS cable assembly

The CI-BUS cables must be assembled with appropriate crimp

terminals and a matching housing. See chapter4, "Required

connectors for the CI-BUS" on page 5 for specification details.

Always adhere to the manufacturer's guidelines.

1 2 3

Fig.13 CI-BUS cable assembly

1 Cable

2 Crimp terminals

3 Housing

1 2 3 4 5

Fig.14 CI-BUS interconnection cable assembly between two CI-BUS

units

1 Housing CI-BUS (CI-BUS unit 1)

2 Crimp terminals CI-BUS (CI-BUS unit 1)

3 Cable

4 Crimp terminals CI-BUS (CI-BUS unit 2)

5 Housing CI-BUS (CI-BUS unit 2)

5.8 Adaptor frame installation

1. Make sure the roof is clean, dry and free from oil or grease.

2. Insert the adapter frame into the cut-out to make sure that

the power supply cable and the CI-BUS cable (if applicable)

do not interfere with the frame. If the cables cause obstruc-

tions, then cut or drill openings in the bottom of the frame

to lead the cables through.

3. Confirm the correct orientation of the frame by using the

“This side up” label.

Fig.15 Orientation of the adaptor frame

4. Turn the part over and on the reverse side of “This side up”,

apply silicone sealant uniformly over the path shown.

Fig.16 Sealant paths

5. Turn the part over again and make sure “This side up” is

up. Press down firmly over the installation hole and remove

any sealant that has squeezed out.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Webasto Cool Top Trail 28 Seite 8

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info