Bedienungsanleitung Webasto Dual Top ST 8 (Seite 13 von 19) (Englisch)

802472

Zoom out

Zoom in

Vorherige Seite

1/19

Nächste Seite

Operating instructions | 4

9026381C Dual Top ST 6 _ 8 - OI 13 / 19

4.6 Remote control

The heater can be operated by the Webasto Telestart remote

control device. This is optional.

If the remote control is enabled, the remote control commands

overrule the control panel.

4.6.1 Show actual mode

Make sure the device is switched on.

1. Press MENU.

2. Press and to select “ Setting Telestart”.

3. Press OK.

4. Press and to select “Show actual mode”.

5. Press OK.

6. One of the following messages is shown, depending on the

remote control function being disabled or enabled:

– Disabled: “Telestart disabled”.

– Enabled: “Telestart enabled. Receiving a signal from

Telestart system heats up cabin to ... °C and provides hot

water”.

NOTE

The temperature unit (... °C or ... °F) and values depend

on settings and the interior temperature.

NOTE

“and provides hot water” only appears when you select

the “Heating Cabin + Hot Water” function.

Press BACK to return to the main menu.

4.6.2 Enabling and setting Telestart

For Dual Top ST 8: If you want the electric heater to provide hot

air and hot water, make sure to connect the external power

supply (230 V AC): “ 230 V” (10) on display.

Make sure the device is switched on.

1. Press MENU.

2. Press and to select “ Setting Telestart”.

3. Press OK.

4. Press and to select “Telestart enabling and set-

ting”.

NOTE

If text “Telestart not connected Visit

www.webasto-dualtop.com” appears, remote control

device is not connected.

uPress BACK to return to main menu.

5. Press OK.

6. Press and to select “ Heating Cabin” or “Heating

Cabin + Hot Water”.

7. Press OK. For Dual Top ST 6:continue at step 10.

8. For Dual Top ST 8: press and to select the desired heat

source:

Dual Top ST 8

“Diesel powered”

“1000 W ~ 230 V“ *

“2000 W ~ 230 V“ *

“Diesel + 1000 W ~ 230 V“ *

“Diesel + 2000 W ~ 230 V“ *

* Options “...W ~ 230 V” shown only when external 230 V

power supply is connected

9. Press OK.

10. Press and to select the desired interior temperature.

11. Press OK. The display shows: “Enabling Telestart success-

ful”.

After 3 seconds the display shows the actual status of the appli-

ance at the time.“ “ (8).

4.6.3 Disabling Telestart

Make sure the device is switched on.

1. Press MENU.

2. Press and to select “ Setting Telestart”.

3. Press OK.

4. Press and to select “Telestart disabling”.

5. Press OK.

The display shows“Disabling Telestart”. The Telestart remote

control option disappears after 3 seconds. The display now

shows the actual status and time. The “ “ icon (8) no longer

appears .

4.6.4 Start and stop heater operation using

Telestart

To start and stop the heater operation using the Telestart, Tele-

start must be available and activated. This can be recognised

from an indicated symbol “ “ (8).

Starting heater operation:

1. Press the ON button of Telestart. LED of Telestart lights

green, showing that signal was transferred successfully.

2. The heater starts running in the (in chapter4.6.2, "Enabling

and setting Telestart" on page 13 ) selected mode, inde-

pendent from the actual heater status (heater off, heater

on, drainage, ...).

Stopping heating operation:

1. Press the OFF button of Telestart. LED of Telestart lights

red, showing that signal was transferred successfully.

2. The heater stops any heating operation and switches off,

independent from the actual heater status.

Exception: running drainage will be continued.

NOTE

If the Telestart LED blinks red after pressing the ON or

OFF button of the Telestart, the signal was not trans-

ferred successfully.

4.7 Frost

There are several features that protect the water supply system

against frost.

nDrain water contents manually when there is risk of frost

and when storing the vehicle for a longer period. See

chapter4.7.1, "Draining the boiler manually" on page 14.

nThe boiler is drained automatically in case you forget to

drain manually. See chapter4.7.3, "Draining the boiler

automatically" on page 14.

nIf you do not want to drain the water supply system and

you do not heat the interior of the vehicle, you can select

the frost protection mode. See chapter4.7.4, "Frost protec-

tion" on page 15.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Webasto Dual Top ST 8 Seite 13

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Webasto Dual Top ST 8

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info