Bedienungsanleitung Weller WECP-20 (Seite 19 von 57) (Holländisch, Alle Sprachen)

99768

Zoom out

Zoom in

Vorherige Seite

1/57

Nächste Seite

1. Description

1. Electronic temperature adjustment, continuously variable from 150°C - 450°C or

with encoder models, fixed temperatures are obtained using encoder plugs.

2. Antistatic soldering iron LR-21 (24V/50W).

3. High performance heating element. (Insulation) 500V.

4. Selection of 22 WELLER "Longlife" Soldering tips.

5. Temperature resistant silicon cord.

6. Visible regulation control.

7. Socket for potential equalisation.

8. Potentiometer locking

9. Mains switch

10. Mains fuse T 0.315A (5x20)

11. 5-channel plug, interlocking

12. Safety support rack, can be free-standing or connected either to the left or right

side of the control unit

13. Cleaning sponge

14. Holder for additional tips.

The soldering Station WECP-20 is best suited for soldering electrically or thermally

sensitive electronic components. A large variety of soldering tools can be connected

via the 6-channel connection socket. The available soldering tools are given in the

accessories list. All soldering tools are electrically isolated from mains and operate

with a protective low voltage of 24V AC.

Analogue temperature regulation is carried out using a potentiometer which can be

used to set the temperature continuously in a range of 50°C to 450°C. A green LED

indicates the status of the regulation.

The mains fuse is easy to change. The fuse can be removed by lightly pushing in the

fuse holder and turning it to the left. Potential equalisation of the soldering tip can be

achieved using the corresponding connection socket on the front side of the unit.

Through the antistatic design of the control unit and irons, the Soldering Station WECP-

20 antistatic fulfils all requirements of the EGB safety regulations.

The soldering station WECP-20 is also available in encoder versions and can be converted

to a COD (encoder) version with a conversion kit.

The soldering iron LR 21* comes standard with a temperature resistant silicon cord

and a "WELLER Longlife" soldering tip type ET-B. The lifetime of the "WELLER Longlife"

soldering tip is lengthened substantially by the electro-plated finish on the copper core.

There are 22 different soldering tip forms to choose from. You can choose the optimal

tip from one of these.

* Information contained in the Operation Manuals of any other connected WELLER

tools should be observed in addition to the information contained in this Operation

Manual.

Technical Data

Dimensions (WxDxH): 115 x 150 x 94

Mains voltage: 230V (240V, 120V), 50 (60) Hz

Heating voltage: 24V, 50 (60) Hz

Soldering iron power: max. 50W at 24V

Mains fuse: T 0.315A

Accuracy: Regulation tolerance ± 2% of final value

Weight: 2.1 kg

Picture: Soldering tip choices, see page 46+47

2. Commissioning

Fasten the holder spring with funnel to the foot plate of the soldering iron holder (see

exploded view) and soak the cleaning sponge with water (13). Place the soldering iron

into the safety support rack (12). Insert the soldering iron plug (11) into the 6-channel

connection socket of the control unit and lock it. Connect the control unit to mains. Be

sure to check for the correct voltage.

Set the desired temperature using the potentiometer (1) and switch on the unit at the

mains switch (9). With COD versions, use the corresponding coded plug to set the

temperature.

The green LED illuminates (6). This LED indicates the status of the regulation.

"Continuous illumination" indicates that the actual temperature lies below the set

temperature. The system is heating.

"Blinking" indicates that the actual temperature corresponds to the set temperature.

WECP20.pm65 11.03.2002, 11:19 Uhr18

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Weller WECP-20 Seite 19

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info