Bedienungsanleitung Weller WECP-20 (Seite 21 von 57) (Holländisch, Alle Sprachen)

99768

Zoom out

Zoom in

Vorherige Seite

1/57

Nächste Seite

8. WARNING NOTICES!

1. Keep your work area in proper order.

Always return the soldering tool to its original holder when not in use. Do not bring

combustible materials near the hot soldering tools.

2. Take care for the surroundings.

Don't use the soldering tool in a moist or wet environment.

3. Protect yourself against electrical shocks.

Avoid touching grounded parts with your body, e.g. pipes, heating radiators, stoves,

refrigerators.

4. Keep children at a distance.

Don't allow other persons to touch or disturb the soldering tool or cord. Keep other

persons away from your work area.

5. Store your soldering tool in an appropriate place

Unused soldering tools should be stored in a dry location which is out of the reach of

children (some place high or in a locked cabinet). Switch off all unused soldering tools.

6. Do not overload your soldering tool.

Use the soldering tool only with the specified voltage or specified pressure and pressure

range.

7. Use the appropriate soldering tool.

Don't use a soldering tool whose performance is not adequate for your work. Never

use the soldering tool for purposes for which is was not designed.

8. Wear suitable work cloths.

There is a danger of burning yourself with liquid solder. Wear the corresponding

protective clothing in order to protect yourself against burns.

9. Protect your eyes.

Wear protective eyewear. When working with bonding agents, it is particularly important

to observe the warning notices of the bonding agent manufacturer. Protect yourself

against spattering solder. There is a danger of burning yourself with liquid solder.

The WELLER Soldering Station WECP-20 complies with the EU Declaration of Conformity

according to the fundamental safety standards of the directive 89/336/EWG,

73/23/EWG and 89/392/EWG.

6. Accessory list

53311099 Soldering iron set MPR-30

53311199 Soldering iron set MLR-21

53312099 Desoldering set WT-50

51305099 Reflow soldering device EXIN-5

52503099 Thermal wire stripper WST-50

52910699 FE 25 soldering iron 25W with device for solder vapour suction

52515399 FE 50 soldering iron 50W with device for solder vapour suction

52609699 Push button adapter for potential equalisation

52911599 Adapter kit for COD version

7. Contents of delivery

Soldering Station WECP-20 antistatic:

Control unit WECP-20 antistatic

Soldering iron LR 21 antistatic

Safety support rack KH-20

Operation manual

Soldering Station WECP-20 COD antistatic:

Control unit WECP-20 COD antistatic

Soldering iron LR21 antistatic

Safety support rack KH-20

Operation Manual

Encoder plug 350°C

Encoder plug 385°C

Picture: Wiring diagram (with error analysis), see page 48+50

Picture: Exploded view, see page 54

Picture: ESD work place, see page 52

WECP20.pm65 11.03.2002, 11:19 Uhr20

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Weller WECP-20 Seite 21

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info