Bedienungsanleitung Westfire WF35 (Seite 15 von 32) (Deutsch, Englisch, Holländisch, Dänisch, Französisch)

813317

Zoom out

Zoom in

Vorherige Seite

1/32

Nächste Seite

WESTFIRE · WF35 WESTFIRE · WF35

5. Once the ﬁre is burning maintain the secondary air control 100%.

6. Now the fully established ﬁre bed is burning brightly. Maintain primary air control at 100%, this is the opera-

tional setting. For the stove to burn cleanly and efﬁciently primary air is needed, do not be tempted to shut the

ﬁre down too early as this may cause smoke. At nominal heat output, expect to refuel your stove once every

two hours.

When lit, the stove will get very hot and due care must therefore be exercised. Please use a glove and operating

tool supplied when operating air controls and riddler.

RE-FUELING Smokeless fuel

To re-fuel your stove. Only refuel your stove when ﬂames have died down and you have glowing embers.

Before refuelling riddle your stove with riddler, open secondary air control fully, open primary air control fully.

Open door and re load 1.1 kg of smokeless coal. Close the door and leave the primary and secondary air controls

open until ﬁre is re-established. Maintain secondary air control at 100% and maintain primary air control to it

operational position (100% open).

Operational Position of air controls during operation and in adverse conditions

You need to become familiar with your stove in order to be able to regulate the air controls correctly, as outside

factors such as the quality and height of your chimney, the quality of your fuel and the external weather condi-

tions can alter the stoves operational settings and performance.

Very damp weather can affect the draw of the stove and therefor more secondary air may be needed to adjust.

Very still cold clear days induce more draught and the setting for secondary air may be less than nominal settings.

Such accommodations will become normal once you are familiar with your stove.

It is easy to see whether the stove is functioning correctly; incomplete combustion will be shown by

1) The inside of the ﬁre chamber ﬁrebricks having a black dusty build up,

2) A build-up of hard shiny soot on the inside of the glass

3) Smoking chimney.

To prevent sooting of the chamber and glass introduce more secondary air, also check that your wood is dry.

It is important to check the draft conditions before lighting your stove. This may be done, for instance, by crum-

pling a piece of newspaper, placing it in the combustion chamber and lighting it. The draft conditions are good if

the smoke is drawn away through the chimney.

Door operation

When opening the door of your Westﬁre stove always wear the glove that is provided to protect your hand from

possible heat. The handle pulls out away from the door. When shutting the door push the door closed and push

handle ﬁrmly to the second closed position. The WF UNIQ 35 door handle has two positions position 1 holds the

door slightly ajar for starting, and position 2 is fully closed.

Recommended Fuels

Good quality wood is the most important factor in your stove working efﬁciently and cleanly. Always use dry

split ﬁrewood. The dryness of the ﬁrewood plays an important role since the use of wet wood results in poor fuel

economy and may cause a tarry sooty ﬁlm on the internals of the stove.

The Westﬁre UNIQ 35 is tested to burn wood and smokeless coal. Wood briquettes can also be burnt but load

weight should be strictly adhered to. For a full list of suitable fuels, check with the ofﬁcial solid fuels approvals

body, HETAS or Solid Fuel Association. Do not overload stove as this can cause excessive heat and damage the

stove. ALWAYS KEEP FUEL LOAD BELOW TERTIARY PORTS AT REAR OF STOVE.

Only use fuels approved for use on heating stoves.

Do not burn liquid fuels, drift wood, ﬁnished wood, sawn wood, pallet wood, chipboard/plywood,

varnished wood or plastic coated wood, wood treated with preservatives, or house hold waste.

DO NOT EXCEED SPECIFIED FUEL WEIGHTS.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Westfire WF35 Seite 15

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info