Bedienungsanleitung Westfire WF35 (Seite 16 von 32) (Deutsch, Englisch, Holländisch, Dänisch, Französisch)

813317

Zoom out

Zoom in

Vorherige Seite

1/32

Nächste Seite

WESTFIRE · WF35

DO NOT BURN HOUSE COAL. DO NOT BURN HOUSEHOLD WASTE; THIS APPLIANCE IS NOT AN INCINERATOR. HOUSE

COAL AND PETROLEUM COKE ARE NOT SUITABLE FOR USE ON THIS STOVE; IT’S USE WILL INVALIDATE THE GUARAN-

TEE WESTFIRE RECOMMEND THE USE OF A FLUE THERMOSTAT TO CHECK YOUR STOVE IS NOT OVERHEATING. PLACE

FLUE THERMOSTAT DIRECTLY ABOVE COLLAR OF STOVE AND REFER TO TEMPERATURE GAUGE IN THIS MANUAL.

Overnight burning

Westﬁre UNIQ 35 is designed to burn wood and quality smokeless fuels.

Wood burns more efﬁciently and cleanly if is burnt hotter and reloaded regularly. Running you stove with combus-

tion air closed is inefﬁcient and bad for the environment. Westﬁre do not recommend that their stoves are burnt

overnight for this reason.

Use of operating tools

Always use the operating tools provided when handling parts likely to be hot when the stove is in use.

The Westﬁre Uniq 35 has:

1. Heat resistant glove

2. Adjustment tool

3. Instruction manual

Maintenance – regular maintenance

Maintenance is an important factor in maintaining the efﬁcient operation of your stove. Please carry out the

following actions regularly.

1. Remove ash regularly, do not allow ash to build up and ﬂow over ash pan. This can interfere with air controls.

Make sure the stove is completely cold before cleaning out ash (embers can remain hot for over 24 hours).

Ash must be stored in a non-combustible container and must not be mixed with other combustible waste.

2. To operate riddling grate push and pull riddling arm on base right of stove using tool provided with the stove.

3. Check vermiculite panels, these panels can crack, this will not affect performance unless the crack grows and

brick break down.

4. Clean glass regularly, do not allow build-up of deposits, regular condensation and acid deposits from combus-

tion cause ceramic glass to whiten and crack. Do not slumber smokeless coal or wood. Clean glass with a

lint free cloth and hot soapy water; do not use an aggressive cleaner. If you have persistent stubborn marks

please use a ceramic glass cleaner. Thoroughly dry the glass after cleaning

5. Clean the outside of your stove with a dry lint free cloth.

6. Check seals for sign of fraying.

Annual service

The inside of the stove should be serviced /cleaned once or twice a year depending on amount of use. Your local

supplier will be able carry out a full service on your appliance. The following steps should taken

1. Clean the inside, remove all ash, soot and tar residue from the combustion chamber. Remove insulated

chamber panels and bafﬂe, dirt and soot will collect behind it and this must be cleaned out.

2. Check the quality of all insulated panels and replace any which are badly damaged,

3. Replace stove rope seals

4. Check glass is correctly seated and glass seals are in good condition.

5. Check air controls

6. Check ﬂue ways: the ﬂue pipe connection and the chimney should be checked regularly by a qualiﬁed

engineer. The chimney should also be checked for blockages before relighting the stove if it has not been

used for an extended period of time.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Westfire WF35 Seite 16

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info