Bedienungsanleitung Whirlpool AKP97860NB (Seite 4 von 4) (Englisch)

757519

Zoom out

Zoom in

Vorherige Seite

1/4

Nächste Seite

You can download the Safety Instructions, User Manual, Product Fiche and Energy data by:

• Visiting our website docs . whirlpool . eu

• Using QR Code

• Alternatively, contact our After-sales Service (See phone number in the warranty booklet). When

contacting our After-sales Service, please state the codes provided on your product's identication

plate.

XXXXXXXXXXXXXX

Model: xxxXXXXxx

CLEANING AND MAINTENANCE

Make sure that the oven has cooled down before carrying out any maintenance or cleaning.

Do not use steam cleaners.

Do not use wire wool, abrasive scourers or abrasive/corrosive cleaning agents, as these could damage the surfaces of the appliance.

Wear protective gloves.

The oven must be disconnected from the mains before carrying out any kind of maintenance work.

EXTERIOR SURFACES

Clean surfaces with a damp microbre cloth. If they are very dirty,

add a few drops of pH-neutral detergent. Finish o with a dry cloth.

Do not use corrosive or abrasive detergents. If any of these products

inadvertently comes into contact with the surfaces of the appliance,

clean immediately with a damp microbre cloth.

INTERIOR SURFACES

After every use, leave the oven to cool and then clean it, preferably

while it is still warm, to remove any deposits or stains caused by

food residues. To dry any condensation that has formed as a result

of cooking foods with a high water content, leave the oven to cool

completely and then wipe it with a cloth or sponge.

Clean the glass in the door with a suitable liquid detergent.

The oven door can be removed to facilitate cleaning.

ACCESSORIES

Soak the accessories in a washing-up liquid solution after use, handling

them with oven gloves if they are still hot. Food residues can be

removed using a washing-up brush or a sponge.

CLEANING THE CATALYTIC PANELS (ONLY IN SOME MODELS)

This oven could be equipped with special catalytic liners that facilitate

cleaning of the cooking compartment thanks to their special self-

cleaning coating, which is highly porous and able to absorb grease and

grime. These panels are tted to the shelf guides: When repositioning

and then retting the shelf guides, make sure that the hooks at the top

are slotted into the appropriate holes in the panels.

1 2

To make best use of the catalytic panels’ self-cleaning properties, we

recommend heating the oven to 200 °C for around one hour using the

“Convection Bake” function. The oven must be empty during this time.

Then leave the oven to cool down before removing any remaining food

residues using a non-abrasive sponge.

Please note: Using corrosive or abrasive cleaning agents, sti brushes,

pan scourers or oven sprays could damage the catalytic surface and

compromise its self-cleaning properties. Please contact our After-sales

Service if you require replacement panels.

REPLACING THE LAMP

Disconnect the oven from the power supply, unscrew the cover from

the light, replace the bulb and screw the cover back on the light.

Reconnect the oven to the power supply.

Please note: Only use 20-40 W/230 V type G9, T300 °C halogen bulbs.

The bulb used in the product is specically designed for domestic

appliances and is not suitable for general room lighting within the home

(EC Regulation 244/2009). Light bulbs are available from our After-sales

Service. If using halogen bulbs, do not handle them with your bare hands

as your ngerprints could cause damage. Do not use the oven until the

light cover has been retted.

REMOVING AND REFITTING THE DOOR

To remove the door, open it fully and lift the catches, pushing them

forwards until they are in the unlock position (1). Close the door as

much as you can. Take a rm hold of the door with both hands – do not

hold it by the handle. Simply remove the door by continuing to close

it while pulling it upwards at the same time until it is released from its

seating (2). Put the door to one side, resting it on a soft surface.

~15°

Ret the door by moving it towards the oven, aligning the hooks of the

hinges with their seating and securing the upper part onto its seating.

Lower the door and then open it fully. Lower the catches into their

original position (3): Make sure that you lower them down completely.

Apply gentle pressure to check that the catches are in the correct

position.

Try closing the door and check to make sure that it lines up with the

control panel. If it does not, repeat the steps above: The door could

become damaged if it does not work properly.

TROUBLESHOOTING

What to do if... Possible reasons Solutions

The oven is not working. Power cut.

Disconnection from the mains.

Check for the presence of mains electrical power and whether

the oven is connected to the electricity supply.

Turn o the oven and restart it to see if the fault persists.

400011416645

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Whirlpool AKP97860NB Seite 4

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Whirlpool AKP97860NB

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info