Bedienungsanleitung Whirlpool AKZM 751 (Seite 36 von 90) (Deutsch)

574728

Zoom out

Zoom in

Vorherige Seite

1/90

Nächste Seite

GB34

SETTING

Turn the “Functions” knob indicator to the symbol to access a submenu containing four display

settings which can be changed.

Clock

Turn the “Functions” knob to the symbol : the word CLOCK appears on the display. To change the time

of day, see the previous paragraph (SETTING THE TIME).

Eco

With the ECO mode selected (ON), the display switches off when the oven is on standby or 5 minutes after

the end of cooking. To view information on the display, simply press a button or turn a knob.

1. Turn the “Browse” knob to display “ECO”.

2. Press to access the setting (ON/OFF).

3. Turn the “Browse” knob to select the desired setting and confirm by pressing button .

Acoustic signal

To activate or deactivate the acoustic signal, proceed as follows:

1. Turn the “Browse” knob to display “SOUND”.

2. Press to access the setting (ON/OFF).

3. Turn the “Browse” knob to select the desired setting and confirm by pressing button .

Brightness

To change the display brightness, proceed as follows:

1. Turn the “Browse” knob to display “BRIGHTNESS”.

2. Press button : number 1 appears on the display.

3. Turn the “Browse” knob to increase or decrease brightness and confirm by pressing .

AUTOMATIC OVEN CLEANING

For the description of this function, see the chapter CLEANING and the functions table at page35.

To activate the oven’s automatic cleaning cycle (pyro-cleaning), proceed as follows:

1. Turn the “Functions” knob to symbol : the word PYRO appears on the display.

2. Press button to confirm your choice and start the pyro-cleaning cycle.

To select ECO pyro-cleaning, turn the “Browse” knob”: the word ECO appears bottom right on the display.

Press button to start the shorter programme.

During pyro-cleaning, the oven door is automatically locked and the symbol appears on the display. The

door remains locked at the end of the cleaning cycle: COOL” appears on the display, indicating the oven is

still cooling down. When the oven cools to a safe temperature, the symbol switches off and the display

shows “END”.

N.B.:if the automatic door lock control procedure fails to execute properly, the symbol appears on the

display . If, on the other hand, the door remains closed due to a fault in the locking system, and “DOOR

LATCHED” appear on the display. In this case, contact the After-sales Service.

KEY-LOCK

This function can be used to lock the buttons and knobs on the control panel.

To activate it, press and at the same time for at least 3 seconds. When activated, the functions

associated with the buttons are locked and the display shows a key symbol. This function can also be

activated during cooking. To deactivate it, repeat the above procedure. When the key-lock function is

activated, the oven can be switched off by turning the knob to 0 (zero). In this case, however, the previously

selected function will have to be set again.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Whirlpool AKZM 751 Seite 36

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Whirlpool AKZM 751

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info