Bedienungsanleitung Whirlpool SMO 658 (Seite 7 von 15) (Englisch)

662557

Zoom out

Zoom in

Vorherige Seite

1/15

Nächste Seite

Use & Care guide

FUNCTIONS

CONTROL PANEL LOCK

To prevent the hob from being switched on accidentally, press and hold

down the OK/Control Lock-3sec control for 3 sec. An acoustic signal and

a light above the symbol will switch on to indicate that the lock is in place.

The control panel is locked except for the switch o function.

To switch o the control lock, repeat the activation process. The light

will switch o and the hob controls are again active.

PAUSE

The Pause function interrupts hob operation for about 30 sec. During this

time, it is possible to clean the surface around the controls without altering

any presets. After this time, the hob will go back to operating as normal.

TIMER

The timer can be used to set a maximum cooking time of 99 minutes.

The timer setting can be used on each cooking zone, following the same

procedure. The timer always shows the time set for the selected area, or

the shortest remaining time.

To start the timer:

1. Switch on the required cooking zone by pressing any part of the

slider.

2. Press the or control to set the required time. The display

will read “00”.

When the set time is up, an acoustic signal will sound and the cooking

zone will switch o automatically.

To change the timer setting:

1. Press the slider control for the cooking zone.

2. Press the or

control to change the required time.

To switch o the timer:

Press the and controls together until the timer switches o.

FLEXIBLE AREA

Select the “Flexible Area” control to control two cooking zones at the

same time. It is possible to use both slider controls at the same time to

control the power.

Using this function is ideal to increase the cooking zone with the

advantage of positioning cookware as needed within the selected area.

Ideal for using oval or rectangular pans or grill pans.

VERTICAL FLEXIBLE ZONE

This can be used to control the two cooking zones on the left and right,

at the same time.

To switch on the Flexible area function:

1. Switch on the hob.

2. Press the control for the type of Flexible area being used (vertical

left, vertical right). Both areas will be connected and the displays

will read “0”.

3. Using the slider, select the power level you require.

To switch o the Flexible area function:

Press the control for the Flexibile area that is functioning: the cooking

zones will go back to operating individually.

The Flexible area function will also switch o when the hob switches o

at the end of cooking.

For the best results, always cover at least one or more points marked on

the glass surface or inside the Flexible area.

FLEXI FULL ZONE

When you select the Flexi Full area, you can control the whole surface of

the hob at a single power level.

Any of the sliders can be used to control the power. Using this function

is ideal to extend the cooking zone with the advantage of being able to

place pans where you like inside the whole area. It is also excellent for

large, oval, or rectangular pans or grill pans.

Covering the whole activated area will achieve the maximum available

power.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Whirlpool SMO 658 Seite 7

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Whirlpool SMO 658

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info