Bedienungsanleitung Whynter MSFS-009H11517-01NE (Seite 11 von 22) (Englisch)

727503

Zoom out

Zoom in

Vorherige Seite

1/22

Nächste Seite

FEATURES OF THE REMOTE CONTROL / DISPLAY

7. UP and DOWN Button Press the UP button to increase the indoor temperature setting or to ad-

just the TIMER (clock time) in a clockwise direction. Press the DOWN

button to decrease the indoor temperature setting or to adjust the TIMER

(clock time) in a counter-clockwise direction.

NOTE: Pressing and holding the UP and DOWN buttons together

for 3 seconds will alternate the temperature display between the C & F

scale.

8. Silence / FP Button Press Silence button once activate Silence mode. When activated, the

compressor will operate at low frequency and the indoor unit will bring

faint breeze, which will reduce the noise to the lowest level and create a

quiet and comfortable room for you. Due to low frequency operation of

compressor, it may result in insufficient cooling and heating capacity.

Press FP button for 2 seconds to active FP function (Freezing Protec-

tion). The unit will operate at a set temperature of 46°F. The display win-

dow of the indoor unit will display FP. Press the buttons of ON/OFF,

SLEEP, FP, MODE, FAN SPEED UP or DOWN while operating will

cancel the FP function.

Note: FP can only be activated only on HEAT mode.

9. TIMER ON Button Press the Timer On button to program Timer Delayed Switch ON func-

tion

10. TIMER OFF Button Press the Timer Off button to program Timer Delayed Switch OFF func-

tion

11. DIRECT Button Press to change the louver movement and set the desired up/down air

flow direction. The louver changes 6° in angle for each press.

12. SWING Button Press to stop or start horizontal louver auto-swing feature.

Mode Display

Displays the current operation mode.

Including Auto, Cool, Dry, Heat, and

Fan.

Sleep Display

Displays when SLEEP mode is set. Press

the SLEEP button again to turn off.

Transmission Indicator

This transmission indicator lights when

remote control transmits signals to the

indoor unit.

FOLLOW ME Display

Displays when FOLLOW ME function is acti-

vated.

ON/OFF display

Displays when the unit is On. Press the

ON/OFF button again to turn off the unit.

Temperature/Timer display

Displays the timer set in (H) hourly incre-

ments and temperature settings in (°F) de-

gree increments.

When unit is in FAN mode, no temperature

setting is displayed.

TIMER ON display

Displays when TIMER ON time is set

TIMER OFF display

Displays when TIMER OFF time is set

Fan Speed Display

Displays the selected fan speed:

AUTO (no display), LOW ,

MED , and HIGH .

The fan speed is automatically set to AUTO

when the operating mode on either AUTO

or DRY mode.

NOTE: This air conditioner is equipped with a emergency switch which can be accessed by opening the

front panel. This switch is used for manual operation in case the remote control fails to operate.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Whynter MSFS-009H11517-01NE Seite 11

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info