Bedienungsanleitung Wiesba WB9L (Seite 10 von 88) (Holländisch)

816532

Zoom out

Zoom in

Vorherige Seite

1/88

Nächste Seite

ENGLISHen

q21q

Original Instructions

We, being solely responsible, hereby declare that

these drills, identified by type and serial number *1),

meet all relevant requirements of directives *2) and

standards *3). Technical documents for *4) - see

page 3.

For UK only:

We as manufacturer and authorized person to

compile the technical file, see *4) on page 3,

hereby declare under sole responsibility that these

drills, identified by type and serial number *1) on

page 3, fulfill all relevant provisions of following UK

Regulations S.I. 2016/1091, S.I. 2008/1597, S.I.

2012/3032 and Designated Standards EN 60745-

1:2009+A11:2010, EN 60745-2-1:2010, EN IEC

63000:2018.

The drills are suitable for non-impact drilling in

metal, wood, plastic and similar materials.

Furthermore, the BE 600/13-2 is suitable for thread

tapping and screwdriving.

The user bears sole responsibility for any damage

caused by inappropriate use.

Generally accepted accident prevention

regulations and the enclosed safety information

must be observed.

For your own protection and for the

protection of your electrical tool, pay

attention to all parts of the text that are

marked with this symbol!

WARNING – Reading the operating instruc-

tions will reduce the risk of injury.

WARNING – Read all safety warnings,

instructions, illustrations and

specifications provided with this power tool.

Failure to follow all instructions listed below may

result in electric shock, fire and/or serious injury.

Save all warnings and instructions for future

reference. Pass on your electrical tool only

together with these documents.

Use the side handle(s), supplied with the tool.

Loss of control can cause personal injury.

Mains powered machines: Hold the power tool

by insulated gripping surfaces, when

performing an operation where the cutting

accessory or fasteners may contact hidden

wiring or its own cord. Cutting accessory

contacting a "live" wire may make exposed metal

parts of the power tool "live" and could give the

operator an electric shock.

Cordless machines: Hold the power tool by

insulated gripping surfaces, when performing

an operation where the cutting accessory or

fasteners may contact hidden wiring. Cutting

accessory contacting a "live" wire may make

exposed metal parts of the power tool "live" and

could give the operator an electric shock.

a) Never operate at higher speed than the

maximum speed rating of the drill bit. At higher

speeds, the bit is likely to bend if allowed to rotate

freely without contacting the workpiece, resulting in

personal injury.

b) Always start drilling at low speed and with

the bit tip in contact with the workpiece. At

higher speeds, the bit is likely to bend if allowed to

rotate freely without contacting the workpiece,

resulting in personal injury.

c) Apply pressure only in direct line with the bit

and do not apply excessive pressure. Bits can

bend causing breakage and loss of control,

resulting in personal injury.

Ensure that the place where you wish to work is free

of power cables, gas lines or water pipes (e.g.

check using a metal detector).

Smaller workpieces must be secured in such a way

that they are not carried along with the tool (e.g. by

clamping in a vice or on a work bench with screw

clamps).

Keep hands away from the rotating tool! Remove

chips and similar material only with the machine at

a standstill.

High forces are released if the tool jams or catches.

Always hold the machine with both hands by the

intended handles, take a secure stance and

concentrate on the work.

Caution must be exercised when driving screws into

hard materials (driving screws with metric or

imperial threads into steel)! The screw head may

break or a high reverse torque may build up on the

handle.

Reducing dust exposure:

WARNING - Some dust created by power

sanding, sawing, grinding, drilling, and other

construction activities contains chemicals known to

cause cancer, birth defects or other reproductive

harm. Some examples of these chemicals are:

- Lead from lead-based paints,

- Crystalline silica from bricks and cement and

other masonry products, and

- Arsenic and chromium from chemically treated

lumber.

Your risk from these exposures varies, depending

on how often you do this type of work. To reduce

your exposure to these chemicals: work in a well

ventilated area, and work with approved safety

equipment, such as those dust masks that are

specially designed to filter out microscopic

particles.

This also applies to dust from other materials such

as some timber types (like oak or beech dust),

metals, asbestos. Other known diseases are e.g.

1. Declaration of Conformity

2. Specified Use

3. General Safety Instructions

4. Special Safety Instructions

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Wiesba WB9L Seite 10

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info