Bedienungsanleitung Wiking Atomic (Seite 28 von 52) (Deutsch, Englisch, Italienisch)

745748

Zoom out

Zoom in

Vorherige Seite

1/52

Nächste Seite

Some Things Worth Knowing about the Smoke Pipe

Description of the Smoke pipe’s Function

The smoke pipe is the duct located between your wood-burning stove and

chimney. Your WIKING wood-burning stove is equipped with an exhaust

pipe 150 mm in diameter, which is compatible with all WIKING smoke pipes.

Purchasing original WIKING smoke pipes provides you with pieces with the

exact same colour and surface as your wood-burning stove, as they are

treated with the same lacquer. WIKING smoke pipes are available in many

different shapes and lengths to match you individual needs.

If your stove is to be connected to a brick chimney, it is best to mount a curved smoke pipe to

the stove’s top outlet. The WIKING Fullform smoke pipe (see Figure 4) extends a half meter

over the stove and then into the brick chimney. This solution - in which the smoke pipe extends

a half meter over the stove before connecting to the chimney - provides your home with 1 kW

of extra warmth. The curved shape ensures minimum soot build-up in the pipe and thereby

lessens the risk of chimney res. We only recommend this solution provided that your brick

chimney is completely sealed and has a sufcient draft. You can read more on the chimney in

the next section.

Some Things Worth Knowing about the Chimney

Description of the Chimney’s Function

The chimney serves as the wood-burning stove’s ‘motor’, and it is crucial to the stove’s proper

functioning. The chimney draft creates a vacuum inside the wood-burning stove. This vacuum

serves two purposes:

To remove smoke from inside the wood-burning stove.

To suck air in through the air damper during lighting and combustion, and to keep the

glass pane free of soot.

How to create the best possible chimney draft

Even a quality chimney can function poorly if used improperly. It is crucial that both your wood-

burning stove and the chimney are installed in accordance with the directions; otherwise it will

not be possible to attain satisfactory combustion.

Chimney draft is created by the difference in temperature between the inside and outside of

the chimney. The higher the temperature inside the chimney, the better the chimney draft. It

is therefore very important that the chimney is thoroughly heated before you close the pri-

mary damper and limit combustion inside the stove; see the section on lighting and ring your

WIKING wood-burning stove on page 27. Please be aware that it takes longer to heat a brick

chimney than a steel chimney.

On days when weather and wind conditions create a poor draft in the chimney, it is especially

important to heat up the chimney as quickly as possible. When lighting, use extra-nely split

rewood and an extra relighter, as ames quickly heat up the stove.

400 mm

500 mm

Fig. 4

English

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Wiking Atomic Seite 28

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info