Bedienungsanleitung Wiking Volcanic 1 (Seite 27 von 52) (Deutsch, Englisch, Italienisch)

745740

Zoom out

Zoom in

Vorherige Seite

1/52

Nächste Seite

Firing (Adding Firewood)

When there are no more visible ames and only a solid layer of embers remains, more fuel

can be added to the re.

1. Carefully open the door to prevent smoke and embers from escaping.

2. Lay 2-4 pieces of split rewood (approximately 2 kg) on top of the embers.

Close the door again and open the damper completely by pulling the lever towards

yourself.

4. After a short while the ames should are up again. When the rewood is fully ignited,

push the damper 10 mm in, depending on how much heat you want. The further in your

push the lever, the less heat produced by the stove.

Warning: During combustion, the stove’s surfaces and door become extremely hot - exercise

great caution.

Some Things Worth Knowing about the Smoke Pipe

Description of the Smoke Pipe’s Function

The smoke pipe is the duct located between your wood-burning stove and chimney. Your WIKING

wood-burning stove is equipped with an exhaust pipe 150 mm in diameter.

If your stove is to be connected to a brick chimney, it is best to mount a curved smoke pipe to

the stove’s top outlet. This solution - in which the smoke pipe extends a half meter over the stove

before connecting to the chimney - provides your home with 1 kW of extra warmth. The curved

shape ensures minimum soot build-up in the pipe and thereby lessens the risk of chimney res.

We only recommend this solution provided that your brick chimney is completely sealed and

has a sufcient draft. You can read more on the chimney in the next section.

Some Things Worth Knowing about the Chimney

Description of the Chimney’s Function

The chimney serves as the wood-burning stove’s ‘motor’, and it is crucial to the stove’s proper

functioning. The chimney draft creates a vacuum inside the wood-burning stove. This vacuum

serves two purposes:

1. To remove smoke from inside the wood-burning stove.

2. To suck air in through the air damper during lighting and combustion, and to keep the glass

pane free of soot.

How to Create the Best Possible Chimney Draft

Even a quality chimney can function poorly if used improperly. It is crucial that both your wood-

burning stove and the chimney are installed in accordance with the directions; otherwise it will

not be possible to attain satisfactory combustion.

Chimney draft is created by the difference in temperature between the inside and outside of

the chimney. The higher the temperature inside the chimney, the better the chimney draft. It is

therefore very important that the chimney is thoroughly heated before you close the primary

damper and limit combustion inside the stove; see the section on lighting and ring your WIKING

wood-burning stove. Please be aware that it takes longer to heat a brick chimney than a steel

chimney.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Wiking Volcanic 1 Seite 27

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Wiking Volcanic 1

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info