Bedienungsanleitung Winix U300EU (Seite 9 von 30) (Deutsch, Englisch, Holländisch)

690081

Zoom out

Zoom in

Vorherige Seite

1/30

Nächste Seite

The air quality light is

green, but there is still

dust/odor in the air.

• Replace the filters as needed.

The air quality light is

yellow or red, but the

air seems clean.

• Clear the sensor with a vacuum cleaner, as it may be blocked or

clogged.

- Sometimes a compressed can of air may unclog the dust in the

sensor.

OCCURRENCE POSSIBLE CAUSE / SOLUTION

Unit makes a ticking

sound.

• This is caused by the PlasmaWave™ . technology, it may

come and go depending on the environment, but as long as the

PlasmaWave™ light is on, the function is working.

Unit interferes with radio

or television reception.

• Because this unit radiates radio frequency energy, we suggest

you try one or more of the following:

- For better reception, adjust the television/radio antenna.

- Move the unit away from the affected television/radio.

- Plug the unit power cord into an outlet different from the

television/radio power cord.

The unit is running on

high all the time.

Clear the sensor with a vacuum cleaner, as it may be blocked or

clogged.

- Sometimes a compressed can of air may unclog the dust in the

sensor.

OCCURRENCE POSSIBLE CAUSE / SOLUTION

There is an odor coming

from the unit and I just

opened it.

The unit has been concealed in a tightly wrapped package of

currogated cardboard and plastic. Because this has a fan and

pulls air through it, it may give off some “new” odors. Depending

on sensitivity, this should wear off in several days or perhaps a

week depending on how much it is used.

I am not sure what filter

to buy?

Go to www.winixinc.com to see which filter options are available

for your unit by reviewing the reference chart.

Will this clean a bigger

area than what it is

rated for?

CADR ratings are provided from a controlled testing environment,

if that environment changes, it can affect the performance.

However if you have a slightly larger room than what the CADR

rating is, it will still help improve the air, but may take a bit longer

to do so.

Where should I place the

unit?

At least 2 feet away from the wall to allow proper circulation

around the unit. If there are doors or narrow hallways it may

reduce the airflow to the air cleaner, but will eventually circulate

near the machine.

Can I turn off the sleep

mode?

No, however you can manually push what fan speed you prefer

which will stay at that speed until you change it.

The unit has stopped

removing odors

effectively, or seems to

be emitting an odor.

• Make sure the AIR QUALITY sensor is not blocked or clogged.

• Move the unit closer to the offending odors.

• Replace the filters as they may have reached their capacity

to absorb pollutants. You may need to replace filters more

frequently.

Can I vacuum my filter?

NO - vacuuming will only spread the dust back into the air. If you

think the filter is too dirty, it may be time to replace.

The Remote Control

Does Not Work

- Make sure the battery is installed properly.

- Make sure the battery may not need replacing due to being

worn out.

- Make sure the remote has a clear line of sight to the air

cleaner.

There is still some dust

you can see in the air or

on my furniture

- The unit will capture most dust and particles, however with

opening doors, windows, central HVAC etc… there may still

be some level of dust that you can see.

There is nothing holding

the filters in place

- The filters are meant to rest inside the unit. Once the unit

is turned on, the force of air pulled through the machine will

create a tight seal of the filters.

I can hear revving of the

fan motor

- This is normal, especially at night when all environmental

sounds are quiet, you may hear the motor running in

repetition.

The unit is running on

high all the time.

• Clear the sensor with a vacuum cleaner, as it may be blocked or

clogged.

- Sometimes a compressed can of air may unclog the dust in the

sensor.

15 16

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Winix U300EU Seite 9

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info