Bedienungsanleitung Wmf KUCHENminis One for All - 1644 (Seite 20 von 124) (Deutsch, Englisch, Holländisch, Dänisch, Französisch, Italienisch, Spanisch, Schwedisch, Norwegisch, Finnisch)

690798

Zoom out

Zoom in

Vorherige Seite

1/124

Nächste Seite

Pulse function

To use the pulse function, select PULSE on the speed controller (10).

The motor operates at maximum speed while the speed controller (10) is set to

the pulse function. The maximum runtime must not exceed one minute.

Planetary mixing system

The planetary mixing system ensures that the ingredients are mixed thoroughly

and evenly. This prevents ingredients/dough from sticking to the edge.

Soft-start

The soft-start function always starts the appliance at a low speed, irrespective of

the selected speed. The speed gradually increases until it has reached the required

setting. This prevents ingredients spraying out.

Electronic speed regulator

The appliance is equipped with an electronic speed regulator that serves to keep

the speed constant under different loads.

Timer function

The timer function can be used with or without the appliance’s other functions

to, e.g. set the exact time for the dough to rise. If you activate the timer function,

you can continue using the other functions on the appliance.

Note: The timer function can only be activated when the speed controller (10) is

in the Off position (0).

▪ Press the Start/Pause button or the Plus/Minus buttons to turn on the display.

(Fig. F). The LCD lights up white and shows the preset time “00.”

▪ Press the Plus/Minus buttons to set the desired time. The time can be set in

one-minute increments up to 99 minutes.

Note: The time can also be changed when the timer is activated, by pressing the

Plus/Minus buttons.

▪ Press the Start/Pause button to activate the timer function. The

icon

appears on the LCD and the remaining time is shown.

▪ Once the time has elapsed, the appliance beeps and the timer function

switches off.

Note: Hold the Start/Pause button pressed down for at least three seconds to

reset the timer. “00” appears on the display.

Note: The LCD switches off automatically after one hour if you do not press the

Start/Pause button, Plus/Minus buttons or the speed controller. This resets the

timer.

Pausing the timer function

The timer function can be “paused” at any time.

▪ Press the Start/Pause button to “pause” the time. The

icon starts to ﬂash.

▪ To reactivate the timer function, press the Start/Pause button. The

icon

stops ﬂashing.

Timer function and automatic switch-off

When using the timer function together with the automatic switch-off, the

appliance stops automatically when the preset time has elapsed.

▪ Set the desired time as described in the “Timer function” section.

▪ Start the timer function by selecting a speed setting on the speed controller.

(Fig. G) The LED ring lights up white. The

icon appears on the display and

the remaining time is shown.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Wmf KUCHENminis One for All - 1644 Seite 20

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info