Bedienungsanleitung WOLF-Garten 51 BA (Seite 15 von 38) (Deutsch, Englisch, Holländisch, Französisch, Italienisch)

638534

Zoom out

Zoom in

Vorherige Seite

1/38

Nächste Seite

Emptying of Grassbox

When the collection bag is full, the flap lowers by itself .

1 Attention! Rotary cutter blade

Undertake adjustments on the equipment only after the

motor is switched off and the cutting tool has come to a

standstill.

z Empty collection bag.

z Remove potential blockages in the cutting space before

starting.

Tips for mowing

z To prevent strips of grass from being left unmowed, the cutting

paths must always overlap a few centimeters .

Maintenance

General

1 Caution! Rotating blades

Before all maintenance and cleaning tasks:

z Remove the sparking plug lead.

z Take care not to grab running cutters.

z For safety reasons, replace any worn or damaged parts.

When replacing, follow the instructions for installation

z Check all the visible fastening bolts and nuts regularly to be

sure they are snug and tighten them.

z Only use spare parts made by WOLF; otherwise you do not

have a guarantee that your mower meets safety regulations.

Cleaning

z Always clean the lawnmower after each use with a handbrush.

z Turn the lawn mower on its side (with the air filter facing up).

Sharpening and changing blade

1 Caution! Rotating blades

Before all maintenance and cleaning tasks:

z Remove the sparking plug lead.

z Take care not to grab running cutters.

1 Attention!

An unbalance can develop after regrinding of the blade.

z Always regrind the blades in a specialist workshop, be-

cause an unbalance check should be undertaken accor-

ding to the safety regulations.

z Turn the lawn mower on its side (with the air filter facing up).

z Always change blades in a specialist workshop. A torque

spanner is mandatorily required.

Fastening torque of the screws 46 BAM: 21-30 N-m.

Fastening torque of the screws 51 BA: 40-50 N-m.

Tension of the clutch Bowden cable

z The tension of the clutch Bowden cable must be checked on

a regular basis.

3 Adjustments:

z L1 - L0 = 4-5 mm

z L0 = length of the spring without tension

z L1 = length of the spring under tension

z When the switch is released, the Bowden cable must not

exert any force on the spring.

Change oil only

z While engine is warm and fuel tank empty.

z Change oil after the first 5 working hours. There after change

engine oil every 25 working hours and at the end of the mo-

wing season. Change engine oil more frequently if working un-

der extreme and dusty conditions.

1. Remove oil filler cap.

2. Tilt machine slowly to side and allow oil to drain from the

crankcase through the filler.

3. Oil Fill.

Cleaning of Spark Plug

z Check and clean regularly

z Reset plug gap as required (0,76 mm).

Storage in winter

z Drain the fuel tank.

z Drain the carburettor.

– This can be done by starting the engine and allowing it to

run until it stops of its own accord.

z Clean the mower thoroughly.

z Change the oil.

z Preserve the engine:

– Unscrew the sparking plug and pour one dessert spoon of

engine oil into the sparking plug opening

– Pull the starting cord slowly all the way (oil distribution in the

cylinder)

– Screw the sparking plug back in position (do not replace the

sparking plug lead)

z Store the mower in a cool and dry location.

z The mower should be checked by a WOLF customer service

workshop in the autumn.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

WOLF-Garten 51 BA Seite 15

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info