Bedienungsanleitung WOLF-Garten Expert 40 E (Seite 12 von 110) (Deutsch, Englisch, Holländisch, Dänisch, Französisch, Italienisch, Polnisch, Türkisch, Schwedisch, Norwegisch, Finnisch)

638175

Zoom out

Zoom in

Vorherige Seite

1/110

Nächste Seite

z Plugs and couplings must be protected from splashes.

z Use a residual current protection device (RCD) with a residual

current not exceeding 30 mA.

z Fit the connection cable to the mains lead cleat. Do not allow

to rub against edges or against sharp or pointed objects. Do

not squeeze cables through tight door or window openings.

Switch devices must not be removed or circumvented (e.g.

connecting the switch lever to the handle bars)

When mowing

z Do not tilt the lawnmower when switching on the motor, unless

the lawnmower has to be tilted when starting. If that is the

case, do not tip the lawnmower more than absolutely neces-

sary, and only lift the part furthest removed from the user. Al-

ways ensure that both hands are in the operating position

before replacing the lawnmower on the ground.

z Caution, danger! Cutting gear will continue running!

z Maintain the safety distance prescribed by the handle bars.

z Only switch on the motor if your feet are at a safe distance

from the cutting gear.

z Take care to ensure a safe and stable position, especially on

slopes. Never run; always walk calmly forward.

z Always mow slopes at right angles to the incline; never mow

up and down.

z When mowing slopes, be especially careful when changing di-

rection.

z Never mow steep slopes.

z Be especially careful when mowing backwards and pulling the

lawnmower towards you.

z Switch the mower off when tilting it, running on empty or trans-

porting the lawnmower, e.g. to/from a lawn or along paths.

z Never use the lawnmower if safety devices are faulty or mis-

sing, such as deflector and/or grass catchment devices.

z Caution: do not touch running cutters.

z Always keep hands and feet away from rotating parts. Do not

stand in front of the grass ejector opening.

z Never lift or carry a lawnmower while the motor is running.

z Never open the guard flap while the motor is still running.

z Before removing the grass catchment device, turn off the mo-

tor and wait until the cutting gear has stopped running. After

emptying the grass catchment device, reattach carefully.

z Never drive across gravel while the motor is running – impac-

ting stones!

z Avoid mowing wet grass where possible.

z Switch off the lawnmower, pull the mains plug and wait for the

lawnmower to stop running if, for example:

– leaving the lawnmower

– unblocking a blade

– intending to check, clean or work on the lawnmower

– you have encountered a foreign object, in which case you

should check the lawnmower for damage and carry out any

necessary repairs.

– the lawnmower is vibrating heavily (switch off immediately

and ascertain the cause).

– you wish to change the settings or carry out cleaning work.

– you wish to check whether the connection cables have be-

come tangled or damaged.

– If the connection cable is damaged during use, it must be

immediately disconnected from the mains power supply.

Do not touch the cable before it has been disconnected

from the mains power supply.

Maintenance

1 Attention! Rotary cutter blade

Before all maintenance and cleaning work:

z Pull out the power plug.

z Do not touch running blades.

z Never spray down the lawnmower using water, especially not

at high pressure.

z Regularly check and tighten all visible screws and nuts, espe-

cially those relating to the cutting bar, to ensure a firm fit.

z Always have blades changed or re-sharpened by a specialist

workshop, since a balance test must be carried out as speci-

fied in the safety regulations following any removal of parts.

z Only use original WOLF-Garten spare parts. Otherwise we

can’t guarantee that your mower conforms to the safety regu-

lations.

z Never park your lawnmower in damp rooms.

z For safety reasons, replace worn or damaged parts.

Disposal

Assembly

Fasten handle bars

1 Caution!

The cable can be damaged while folding up or pulling out

the handle bar.

z Inlay the cable in the bend protection .

z When adjusting the handle height take care that the

cable is not crimped

1. Fold the bottom part of the handle up and screw it tight with

the two hand wheels (1)

2. Set the handle to the desired height .

3. Fold the upper part of the handle out and screw it tight with the

wing nuts (2).

Mount the collecting bag

z See illustrations.

Do not dispose of electrical equipment in domestic

waste. Recycle equipment, accessories and pa-

ckaging in an environment-friendly manner.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

WOLF-Garten Expert 40 E Seite 12

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info