799095

WOLF-Garten PS 20 EM Seite 29

29
Zoom out
Zoom in
Vorherige Seite
1/271
Nächste Seite
Safety information
EN
29
¾If you are setting the tool down, always
ensurethatthemotoristurnedo󰀨.
¾Everytimeyoumovetoadi󰀨erentlocation,
turnthemotoro󰀨andttheprotectivecover.
¾Never use the tool in a wet or moist
environment.
¾Only use chains and bars approved by the
manufacturer.
¾Be aware of chainsaw kickback and prevent
the guide bar tip from contacting objects. Do
not cut with the tip of the guide bar.
Information about vibrations:
¾Vibrations can cause nerve damage and
impair the blood circulation in the hands and
arms.
¾When working in the cold, wear warm
clothing and keep your hands warm and dry.
¾Take breaks.
It has been reported that vibration from hand-
held power tools can contribute to a condition
calledRaynaud’sSyndrome(whitenger
syndrome)incertainindividuals.Whitenger
syndrome is a vascular disorder in which
tinybloodvesselsinthengersandtoes
suddenly contract. The areas concerned no
longerreceiveasu󰀩cientbloodsupplyand
consequently appear extremely pale.
Frequent use of vibrating tools by persons with
poor blood circulation (e.g. smokers, diabetics)
can cause nerve damage. If you notice any
unusualpainsoradversee󰀨ects,stopwork
immediately and see a doctor. Therefore,
if you are a long-term or regular user, it is
recommended that you carefully monitor the
stateofyourhandsandngers.Visitadoctor
immediately if any of the above symptoms
occur. Observe the following instructions to
reduce the hazards:
1. Keep your body warm, especially your hands,
particularly in cold weather.
2. Take regular breaks and use the opportunity
to move your hands around to increase the
circulation. Always maintain a tight grip, but do
not constantly hold the handles with excess
pressure.
3. Limit the length of use of high-vibration tools
per day and spread the use over several
days. Prepare a work schedule that limits the
vibration load.
4. Ensure as small as possible vibration of the
tool by regular servicing and ensuring parts
are rmly attached to it. Replace used parts
and components immediately.
5. Regularly change your working position.
6. If the machine is used more frequently, you
should contact your dealer and procure anti-vi-
bration equipment (handles) as required.
¾Thespeciedvibrationemissionvalues:
• Were measured according to a standardised
testing procedure.
• Make it possible to estimate the power tool
emissions and compare these with di󰀨erent
power tools. Dependent on the conditions of
use, the state of the power tool or the tools
inserted into it for use, the actual load may be
higher or lower. When estimating the emis-
sions, take into account work breaks and
phases when the tool is under reduced load.
Dene protective actions, e.g. organisational
measures, based on appropriately adapted
estimates.
After use
¾Switchthedeviceo󰀨,removetheoperating
arm from the device and check the device for
damage. Attention, danger! Cutting tool still
running!
¾If you need to clean or service the device,
switchito󰀨andremovetheoperatingarm.
Attention, danger! Cutting tool still running!
¾Always wait until the cutting tool comes to
a standstill and do not touch any moving
dangerouspartswithoutrstremovingthe
operating arm from the device.
¾Removal of the protective equipment must
only be performed with the motor stationary
and the operating arm removed.
¾Ensure that ventilation slots are free from dirt.
¾Do not clean the device with water.
¾Store the device in a secure location.
¾Store the device out of reach of children.
¾Let the device cool down before putting it
away and/or storing it.
¾Alwaysttheprotectivecoverafteruseand
when not using.
General safety information
¾Spare parts must meet the requirements of
the manufacturer. Therefore, use only original
spare parts or those spare parts authorised by
the manufacturer. During replacement, always
observe the supplied tting instructions and
always remove the operating arm from the device
prior to use.
¾Repairs must only be performed by a
qualiedtechnicianorservicecentre.
Specialist workshop addresses can be found on
our website.
¾This pole saw is intended for the care of trees
in private households. The device must not
be used for purposes other than those intended
because of the risk of bodily injury to the user or
other persons.
Safety information
… 29 …

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für WOLF-Garten PS 20 EM wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info