Bedienungsanleitung WOLF-Garten TC 32 ME (Seite 10 von 24) (Deutsch, Englisch, Holländisch, Dänisch, Französisch, Italienisch, Polnisch, Schwedisch, Norwegisch, Finnisch)

638400

Zoom out

Zoom in

Vorherige Seite

1/24

Nächste Seite

Maintenance

Disconnect from power supply before performing

maintenance and cleaning.

Clean mower thoroughly after each mowing with cloth or

brush. Please note: the air intake slots of the electric

motor must be freed from grass and moss accumulations

(M4, 1)!

Do not spray machine with water. Store machine in a

dry room.

Adjusting the lower blade (Fig. W1)

You must readjust the blade if the mower no longer cuts the

lawn uniformly and cleanly.

Caution: Wear protective gloves.

Turn over the mower as illustrated. Adjust by loosening or

tightening the two lock nuts (1) on the botton blade (2).

Required tools: Spanner (wrench) 10 mm AF.

Turn the lock nut (1) to the left:

The clearance to the blade cylinder (3) decreases.

Turn the lock nut (1) to the right:

The clearance to the blade cylinder (3) increases. Adjust the

lower blade in such a manner that all cutting edges of the

blade cylinder touch lightly.

Cutting test with paper (Fig. W2)

Caution: Wear protective gloves.

The adjustment is correct if a piece of paper between the

blade spindle and the lower blade is cut cleanly. To do

this turn the blade cylinder by hand.

Note:

If problem-free cutting results are not obtained, in spite of

adjustment as prescribed, then the blade spindle, and/or the

bottom blade must be checked (see maintenance).

Changing blades (Fig. W3)

Caution: Wear protective gloves.

Change worn blades only as a set (15 blades)

15 replacement blades TC-M, part no.: 3628 094

New blade condition „Mach 15“

1. Adjust bottom blade (W1).

2. Conduct cutting test with paper (W2).

All other repairs must be performed by a WOLF service

center.

Remedy (X) by:

Problem Possible cause

WOLF

service-workshop

Yourself

Motor will not run

• Fuse blown

• Overload/blocking

(Safety switch has shut mower off)

• Cable damaged

Important! If you inadvertently cut through the cable,

the fuse (10 Amp.) will not always blow. In the interest

of safety, never touch damaged or servered cables be-

fore disconnecting the mains plug. Repairing the cable

with insulating tape is prohibited.

---

In case of unsteadiness or

heavy vibration

• Blades are damaged

• Bottom blade is set incorrectly

---

Poor mowing

• Blades are dull

• Incorrect cutting height

• Lower blade dull

---

Blade spindle does not

rotate

• Blades are blocked (grass, branches, etc.)

• Toothed belt is damaged

---

When in doubt, always consult a WOLF service workshop.

Important: switch off the mower and disconnect the mains plug before inspecting, cleaning or working on the blades.

Please carefully retain the guarantee card completed by the

seller, or the proof of purchase.

The company WOLF-Garten provides a guarantee for 24 months

from the date of purchase. This guarantee is in accordance with

the relevant state of technology and the utilisation purpose / area

of application. The consumer‘s statutory rights are not affected by

the following guarantee guidelines.

Pre-conditions for the 24-month guarantee entitlement:

- Deployment of the device solely for private use.

The guarantee is reduced to 12 months in the commercial

sector or leasing business.

- Proper handling and observance of all information given in the

operating manual, which forms part of our guarantee terms.

- Observance of the prescribed maintenance intervals.

- No unauthorised alteration of the design.

Guarantee terms

- Installation of original WOLF replacement parts / accessories.

- Presentation of the completed guarantee card and/or proof of

purchase.

This guarantee does not extend to normal wear-and-tear on

blades, blade mounting components or friction disks, V-belts/

toothed belts, running wheels/tyres, air filters, spark plugs and

spark plug connectors. Any guarantee claim shall be immediately

void in the event of unauthorised repairs. Faults and defects which

can be traced to material or manufacturing faults will be rectified

exclusively by our contracted workshops (the seller has the right to

remedy a defect) in your vicinity, or by the manufacturer if the latter

is closer. Any claims going beyond the provision of a guarantee are

ruled out. There is no entitlement to a replacement. Any transport

damage should be reported not to us but to the shipper in question

since, otherwise, any compensation claims vis-à-vis the shipper

would be voided.

Faults and how to remedy

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

WOLF-Garten TC 32 ME Seite 10

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info