799044
11
Zoom out
Zoom in
Vorherige Seite
1/86
Nächste Seite
11
G
Fit the connection cable to the mains lead cleat. Do not allow
to rub against edges or against sharp or pointed objects. Do
not squeeze cables through tight door or window openings.
Switch devices must not be removed or circumvented (e.g.
connecting the switch lever to the handle bars)
During starting up
Only switch on motor when your feet are at a safe distance
from the cutting tools.
Do not tilt the machine when switching on the motor, unless
the machine has to be tilted when starting. If that is the case,
do not tip the machine more than absolutely necessary, and
only lift the part furthest removed from the user. Always ensu-
re that both hands are in the operating position before repla-
cing the machine on the ground.
During aerating / scarifying
Warning, Danger! Cutting tool is lagging!
Adhere to the safety distance given by the guidance spars.
Never put your hands or feet near the rotating parts.
Always keep away from the ejection opening.
Only switch on motor when your feet are at a safe distance
from the cutting tools.
If possible, avoid the use of the unit when the grass is wet
otherwise exercise extreme caution to avoid slipping.
Always make sure that you have a safe footing, especially on
slopes. Never run, always walk slowly.
Do not use the unit on steep slopes.
Always move the unit horizontally to the slope, never up and
down.
Take particular care when changing direction on inclined
ground.
Take particular care when turning the machine or when pulling
it towards you.
Stop the working tools if:
the machine needs to be tilted for transport.
if areas other than grass are to be crossed
when transporting the machine.
Never use the unit when protective devices or housing parts
are damaged or missing.
Before lifting or removing the unit switch off motor and wait un-
til the operating tools have come to a complete standstill.
Before removing the grassbox or adjusting of the operating
height switch off motor and wait for the complete standstill of
the operating tools.
Replace worn or damaged blades as a complete set. Observe
installation instructions. For safety reasons always use origi-
nal spare parts.
Maintenance and cleaning procedures on the unit as well as
removing the protective devices may only be carried out when
the engine is switched off.
Never store the unit in damp surroundings or near open fl
ame.
Should have run over an object with the unit it should be exa-
mined by a specialist (see list of repair shops) for safety rea-
sons.
If the connection cable is damaged during use it must be dis-
connected immediately. Do not touch the cable until it is dis-
connected.
Switch off the machine, pull the mains plug and wait for the
machine to stop running if, for example:
leaving the machine
unblocking a blade
intending to check, clean or work on the machine
you have encountered a foreign object, in which case you
should check the machine for damage and carry out any ne-
cessary repairs.
the machine is vibrating heavily (switch off immediately and
ascertain the cause).
you wish to change the settings or carry out cleaning work.
you wish to check whether the connection cables have be-
come tangled or damaged.
If the connection cable is damaged during use, it must be
immediately disconnected from the mains power supply.
Do not touch the cable before it has been disconnected
from the mains power supply.
Maintenance
1Attention! Rotary cutter blade
Before all maintenance and cleaning work:
Pull out the power plug.
Do not touch running blades.
Disposal
Assembly
Fixing the grab handle
1Caution!
Take care that you do not kink the electrical cable and
the Bowden cable.
See illustrations for assembly.
Do not dispose of electrical equipment in domestic
waste. Recycle equipment, accessories and pa-
ckaging in an environment-friendly manner.
A
B
C
D
F
11

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für WOLF-Garten VS 302 E wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info