7.3 Replacing of the illuminant
WARNING! Switch off the appliance and let it cool down completely.
Disconnect the appliance from the mains before maintenance (fuse box of
your household power supply)! RISK OF ELECTRIC SHOCK!
NOTICE! When you replace the illuminant, always use a clean cloth or
gloves. Never touch the new illuminant with your bare hands.
NOTICE! Never use a screwdriver to remove the cover. Remove the cover
by hand only! RISK OF DAMAGE!
1. Disconnect the appliance from the mains: switch off the corresponding
fuse in the fuse box of your household power supply!
2. Place a dishcloth in the interior of the cold oven to protect it from possible
damage.
3. Unscrew the lamp cover anticlockwise. Clean the lamp cover and wipe it dry
thoroughly.
4. Unscrew the illuminant from the socket, replace the illuminant. Choose a high
temperature illuminant (300
0
C) with the following parameters:
➢ Voltage 230 V
➢ Power 25 W
➢ Thread G9
5. Do not use any other type of illuminant.
6. Screw the new illuminant in. Check its proper position in the socket.
7. Replace the lamp cover.
8. Remove the dishcloth and switch on the corresponding fuse in the fuse box of
your household power supply again.
According to the EU regulation No. 244/2009, your appliance is classified as a
household appliance in accordance with the eco-design requirements for non-
directional household lamps. This means that illuminants, which are used in
household appliances, must not be used to illuminate domestic establishments.
