Bedienungsanleitung Workzone EP2800i (Seite 18 von 21) (Englisch)

724636

Zoom out

Zoom in

Vorherige Seite

1/21

Nächste Seite

Digital Inverter Generator with Pure Sine Wave

AFTER SALES SUPPORT

e-mail: help@powertoolsupport.com

1800 909 909

MODEL: №. EP2800i • 09/2018 • 62007

(toll free)

AFTER SALES SUPPORT

(toll free)

Digital Inverter Generator with Pure Sine Wave

e-mail: help@powertoolsupport.com1800 909 909

MODEL: №. EP2800i • 09/2018 • 62007

32 33

Maintenance Cleaning

1. Completely empty the tank of fuel. Ensure the fuel tap/lever (23) is in the

OFF position.

2. Compress the two wire arms of the hose clamp on the outlet hose at the

fuel tap/lever (23) and slide the clamp back from the end of the hose by

approx. 25mm (Fig AF). Slide the fuel hose o the outlet of the fuel tap/

lever (23) in an anti clockwise direction.

3. Loosen the lock nut locking the fuel tap/lever (23) on to the tank

(Fig AG) in an anti clockwise direction. Unscrew the tap from the tank,

in an anti clockwise direction, and withdraw the tap from the tank.

Be careful not to lose the small seal on the thread of the tap.

4. Unscrew the fuel tap extension lter (Fig. AH).

NOTE: This lter can be cleaned in petrol to remove any build-up of dirt

on the outside of the lter, or the lter can be replaced. Do not operate

the generator without this lter in place. To replace the lter after

cleaning, or with a new lter, simply screw the lter into the inlet side of

the tap.

5. Ensuring the small seal is tted to the tap thread, screw the tap back into

the tank by a FULL 3 – 4 turns. Orientate the fuel tap/ lever (23) so the

outlet of the tap is towards the rear of the tank, and the tap control is to

the right hand side of the tank. Holding the tap rm, tighten the lock nut

(Fig AE), ensuring the seal is clamped between the lock nut and the tank.

6. Ret the fuel hose to the outlet of the tap and with the wire arms

compressed, slide the hose clamp up onto the connection of the hose

and the tap.

7. Rell the tank with fuel and ensure there are no leaks between the fuel

tap / lever (23) and the tank, and with the fuel tap turned on, ensure there

are no leaks where the fuel hose is tted to the outlet of the tap.

AG.AF. AH.

1. Keep your machine clean. The outside of the machine can be cleaned

using a damp soft cloth with a mild detergent if required. Never use water

to clean the generator as it may cause damage to internal parts.

2. Some maintenance products and solvents may damage the plastic parts;

these include products containing benzene, trichloroethylene, chloride

and ammonia.

3. Use a vacuum to clean air inlet and outlet louvres of the alternator.

4. Take special care to keep the ventilation inlets/outlets free from

obstruction; cleaning with a soft brush followed by a compressed air jet

will usually be sucient to ensure acceptable internal cleanliness.

5. Wear eye protection when carrying out cleaning.

Your new Workzone® Titanium Inverter Generator will more than satisfy your

expectations.

It has been manufactured under stringent Workzone® Titanium Quality

Standards to meet superior performance criteria.

You will nd your new Inverter Generator easy and safe to operate, and, with

proper care, it will give you many years of dependable service.

CAUTION. Carefully read through this entire instruction manual before

using your new Workzone® Titanium Inverter Generator.

Take special care to heed the Cautions and Warnings.

Your Workzone® Titanium Inverter Generator has many features that will

make your job faster and easier. Safety, performance, and dependability

have been given top priority in the development of this Generator, making it

easy to maintain and operate.

Use only Workzone® Titanium replacement parts for your product.

Non-conforming parts or modications made to parts will void

your warranty.

Cleaning

Warranty

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Workzone EP2800i Seite 18

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info