Bedienungsanleitung Workzone EP2800i (Seite 16 von 21) (Englisch)

724636

Zoom out

Zoom in

Vorherige Seite

1/21

Nächste Seite

Digital Inverter Generator with Pure Sine Wave

AFTER SALES SUPPORT

e-mail: help@powertoolsupport.com

1800 909 909

MODEL: №. EP2800i • 09/2018 • 62007

(toll free)

AFTER SALES SUPPORT

(toll free)

Digital Inverter Generator with Pure Sine Wave

e-mail: help@powertoolsupport.com1800 909 909

MODEL: №. EP2800i • 09/2018 • 62007

28 29

Maintenance Maintenance

Your generator should be kept clean and dry at all times. The generator

should not be stored or operated in environments that includes excessive

moisture, dust or any corrosive vapours. If these substances are on the

generator, clean with a cloth or soft bristle brush. Do not use a garden hose

or anything with water pressure to clean the generator. Water may enter the

cooling air slots and could possibly damage the rotor, stator and the internal

windings of the generator head.

Spark Plug

To ensure the engine is operating correctly, the spark plug must be properly

gapped and free of carbon deposits. Always check the spark plug cable is

rmly tted to the top of the spark plug.

WARNING: Ensure the engine is switched o while undertaking

this task.

1. Pull the spark plug lead (19) o the spark plug (20) and then remove spark

plug (20) from the generator using the supplied spark plug spanner by

rotating in a clockwise direction (Fig Y).

2. Remove carbon deposits using a wire brush.

3. Check for discoloration on the top of the spark plug (20).

The standard colour should be a tan colour.

4. Check the spark plug gap. The acceptable gap should be between

0.6 – 0.8mm (Fig. Z).

CAUTION: Check that no foreign material, debris, or dust enters the

crankcase.

Replacement spark plugs are available from purchase from lawn mower or

small engine repair shops.

Z.Y.

Maintenance

Periodic maintenance

Item Remarks

Pre-operation

check (daily)

Initial 1

months

or 20Hr

Every 3

months

or 50Hr

Every 6

months

or 100Hr

Every 12

months

or 300Hr

Spark plug

Check condition, adjust gap and

clean. Replace if necessary.

•

Engine oil

Check oil level. •

Replace. • •

Air filter

Clean. Replace if necessary.

•

Fuel extension

filter

Clean Fuel extension filter.

Replace if necessary.

•

Valve clearance

Check and adjust when engine

is cold.

•

Fuel line

Check fuel hose for crack or

damage. Replace if necessary.

•

Exhaust system

Check for leakage. Retighten or

replace gasket if necessary.

•

Check muffler screen. Clean/

replace if necessary.

•

Carburettor

Check choke operation.

•

Starting system

Check On/Off switch ignition

operation.

•

Decarbonisation

More frequently if necessary.

•

Fittings/

fasteners

Check all fittings and fasteners

correct if necessary.

•

Regular maintenance is most important for the best performance and safe operation.

Periodic Maintenance

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Workzone EP2800i Seite 16

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info