Bedienungsanleitung Workzone TG212T (Seite 7 von 18) (Englisch)

724649

Zoom out

Zoom in

Vorherige Seite

1/18

Nächste Seite

AFTER SALES SUPPORTe-mail: help@powertoolsupport.com

1800 909 909 (toll free)MODEL No.: DBAF50/40 • 61420 • 07/2018

AFTER SALES SUPPORTe-mail: help@powertoolsupport.com

1800 909 909 (toll free)MODEL No.: DBAF50/40 • 61420 • 07/2018

12 13

• Eye protection which conforms to ANSI specications and provides

protection against ying particles both from the front and side should

always be worn by the operator and others in the work area when loading,

operating or servicing this tool. Eye protection is required to guard against

ying fasteners and debris, which could cause severe eye injury.

• The user must ensure that proper eye protection is worn. We recommend

Wide Vision Safety Mask for use over eyeglasses or standard safety glasses

that provide protection against ying particles both from the front and

side. Always use eye protection which is marked to comply with ANSI

Z87.1.

• Additional safety protection will be required in some environments. For

example, the working area may include exposure to noise level which can

lead to hearing damage. The user must ensure that any necessary hearing

protection is used by the operator and others in the work area. Some

environments will require the use of head protection equipment.

• Keep ngers away from trigger when not driving fasteners to avoid

accidental ring.

• Use safety equipment. Always wear eye protection. Dust mask, nonskid

safety shoes, hard hat, or hearing protection must be used for appropriate

conditions.

• Protect your lungs. Wear a face or dust mask if the operation is dusty.

Following this rule will reduce the risk of serious personal injury.

• Protect your hearing. Wear hearing protection during extended periods of

operation. Following this rule will reduce the risk of serious personal injury.

• Battery tools do not have to be plugged into an electrical outlet; therefore,

they are always in operating condition. Be aware of possible hazards when

not using your battery tool or when changing accessories. Following this

rule will reduce the risk of electric shock, re, or serious personal injury.

• Do not place battery tools or their batteries near re or heat. This will

reduce the risk of explosion and injury.

• Use the tool only for its intended use. Do not discharge fasteners into

open air.

• Use the tool only for the purpose for which it was designed.

• Use only the nails or staples recommended for this tool. Use of the wrong

nails or staples could result in poor nail or staple feeding, jammed nails

or staples, and nails or staples leaving the tool at erratic angles. If nails

or staples are not feeding smoothly and properly, discontinue their use

immediately. Jammed and improperly feeding nails or staples could result

in serious personal injury.

• Never use this tool in a manner that could cause a nails or staples to be

directed toward anything other than the workpiece.

• Do not use the tool as a hammer.

• Always carry the tool by the handle.

• Do not alter or modify this tool from the original design or function

without approval from the manufacturer.

• Always be aware that misuse and improper handling of this tool can cause

injury to yourself and others.

• Never clamp or tape the trigger or workpiece contact in an actuated

position.

• Never leave tool unattended if the battery is installed.

• Do not operate this tool if it does not contain a legible warning label.

• Keep the tool and its handle dry, clean and free from oil and grease.

Always use a clean cloth when cleaning. Never use brake uids, gasoline,

petroleum-based products, or any strong solvents to clean your tool.

Following this rule will reduce the risk of loss of control and deterioration

of the enclosure plastic.

OPERATION

• Do not use tool if trigger does not actuate properly. Any tool that cannot

be controlled with the trigger is dangerous and must be repaired.

• Check operation of the workpiece contact mechanism frequently. Do not

use the tool if the workpiece contact mechanism is not working correctly

as accidental driving of a nail or staple may result. Do not interfere with the

proper operation of the workpiece contact mechanism.

• Do not use a tool that does not work correctly.

• Always assume that the tool contains nails/ staples.

• Do not carry the tool from place to place holding the trigger. Accidental

discharge could result.

• Always handle the tool with care:

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Workzone TG212T Seite 7

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info