Bedienungsanleitung Worx WG791E (Seite 13 von 144) (Deutsch, Englisch, Dänisch, Französisch, Italienisch, Portugiesisch, Spanisch, Polnisch)

578151

Zoom out

Zoom in

Vorherige Seite

1/144

Nächste Seite

Lawn Mowing Robot EN

A. Rotate and flip the blades

Your Landroid

M carries the Blades that are all screwed onto the Blade Turning Disc (13). The Blades allow the

Landroid

M do its job and need care and attention. Every once in awhile, you should simultaneously rotate and flip all

blades for a perfect cut. When rotating and flipping the Blades, make sure all the Blades are adjusted at the same time

or else it could make the Blade Disc off balance. If your Landroid

M mows on a normal schedule (daily) then the Blades

should last one season if they are rotated and flipped every month. Always check to see if the Blades are chipped or

damaged and replace them if they are.

B. Replace the blades (See Fig. L)

After some time, usually every season, your Landroid

M’s Blades

will need to be replaced. Your Landroid

M does not like mowing

while using Blades of different age and quality. So when replacing

the Blades, make sure to replace all of them at the same time.

You can replace them with one of the three spare Blade kits and

extra Blade screws supplied with your Landroid

Before attempting to replace your Landroid

M’s Blades, turn the

power off and put on protective gloves. Then follow these steps:

1. Gently flip the Landroid

M over.

2. Remove the battery cover and remove the battery.

3. Take the screws off the Blades with a screwdriver.

4. Firmly screw on the new Blades.

5. Refit the battery and the battery cover.

IMPORTANT: After screwing the Blade to the Blade

Disc, make sure the Blade is able to spin freely.

6.2 Keep it clean

WARNING: Before cleaning turn your Landroid

OFF by pressing the ON/OFF Button. Put on

protective gloves before cleaning the Blade Turning Disc

(13) and do not use running water. (See Fig. M)

A. Cleaning the body

Your Landroid

M will live a much happier and longer life if it is

cleaned regularly. Although, as your Landroid

M is an electric

machine, you will need to take care when cleaning, so DO NOT use

a hose, high pressure washers or otherwise pour running water on

your Landroid

M, it is best to use a spray bottle filled with water .

When cleaning the machine body use a soft brush or clean cloth and

avoid using solvents or polishes (See Fig. M). Lastly, make sure that

you remove all build up of grass clippings and debris.

B. Cleaning the Underside

Again, it is important that you power the Landroid

M OFF using the ON/Off Button and wear protective gloves

before touching the Blade Turning Disc (13).

First, flip your Landroid

M upside down to expose its underside. Here you will see the Blade Disc, the chassis, and the

Front Wheel (15) and Driving Wheel(10). Clean everything thoroughly with a soft brush or moist rag.

Rotate the Blade Disc to make sure it moves freely and that there is not anything lodged between it and the surrounding

Motor Frame Box. Also, make sure the Blades are able to spin freely and that there's no grass obstructing them.

IMPORTANT: Remove any lodged debris so that it does not cause a crack in the Blade Disc. Even the

tiniest crack can decrease your Landroid

M's mowing output.

C. Clean the contact pins and the charging strips

Clean the Contact Pins (3) located on the Charging Base (4) and the Charging Strip (5) located on the Landroid

M using a

cloth. Remove any build up of grass clippings and debris around the contact pins and charge strips periodically to ensure

the Landroid

M successfully charges each time.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Worx WG791E Seite 13

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Worx WG791E

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info