Bedienungsanleitung Worx WR110 MI (Seite 9 von 20) (Englisch)

723927

Zoom out

Zoom in

Vorherige Seite

1/20

Nächste Seite

Owner’s Manual of Lawn Mowing Robot EN

5.2 How does my Landroid

know what to mow?

Your Landroid

is capable of doing things on its own. The Landroid

knows when it needs to go to its Charging Base (3) to

charge, can sense when it is raining, can stop itself if it senses a problem, and knows to stop, draw back, and turn around

when it bumps into something blocking its path. The Landroid

will also automatically stop its Blade Turning Disc (13) from

rotating if it is lifted off the ground to prevent an accident.

A. Finding the charging base

When your Landroid

needs to recharge, it will stop mowing and follow the Boundary Wire (17) in an anti-clockwise

direction back to its Charging Base. Landroid

is pre-programmed to mow the grass near the boundary wire once a week.

By default, Landroid

will mow near the boundary wire at a random time during the next week after it is powered on.

If you don’t want to enable boundary cut, deactivate it via your smartphone. (Please check Technical Data & Declaration of

Conformity for information specific to each model)

B. Rain sensors

The Landroid

is equipped with a Rain Sensor (7) which detects rain

and tells the Landroid

to stop mowing and follow the Boundary Wire

back to its Charging Base (See Fig. B).

Landroid

will resume mowing after passing the Delay Time, The

default Delay Time is 180mins. Delay Time setting can be changed via

Landroid

APP (for specific models only). Please check Technical Data

& Declaration of Conformity for information specific to each model.

When the rain sensors are wet, the Landroid

returns to its charging

base. The error indication light will flash blue four times per cycle.

When the rain sensors dry, Landroid

will begin the Delay Time

countdown or return to mowing (depending on the saved settings).

If you want to exit from the rain delay, dry the sensor area, and

perform a power cycle by operating the Main Switch. After the

power cycle has been performed you can see that the blue led is not

flashing and so you can operate again.

NOTE: If the delay time is set to 0, Landroid

will continue mowing.

C. Sensing the boundary wire

The Landroid

always obeys the border set by the Boundary Wire and uses sensors at its front to detect it. (See Fig. C).

D. Starting and stopping while mowing (See Fig. D, E1, E2)

If you would like Landroid

to stop mowing, simply press the STOP button (9) on top of the mower. To start mowing, turn

the main switch to “I” (on), wait until the battery indication light stays green. Press

, then press . ( If Landroid

has

low battery capacity, the battery indication light will stay red.)

If Landroid

senses something is wrong, the error indication light will indicate the fault message. For information on these messages,

refer to the Error Messages." Landroid

will turn off if it does not receive any input from the user within 20 min.

To resume:

• Turn the Main switch (8) to “O”(off)

• Correct the problem (refer to Error Messages)

• Turn the main switch (8) to “I”(on), Wait until the battery indication light stays green. (If Landroid

has low battery

capacity, the battery indication light will stay red.)

• Press

, then press

• Now the Landroid

will begin to mow!

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Worx WR110 MI Seite 9

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Worx WR110 MI

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info