Bedienungsanleitung Worx WR110 MI (Seite 11 von 20) (Englisch)

723927

Zoom out

Zoom in

Vorherige Seite

1/20

Nächste Seite

Owner’s Manual of Lawn Mowing Robot EN

and can also cause loose traction and slippage while working.

Your Landroid

is afraid of lightening storms. In case of a lightening storm, protect the Landroid

by unplugging the

Charging Base (3), disconnecting the Boundary Wire (17), and making sure the Landroid

is not allowed to charge.

Your Landroid

loves mowing grass and requires the Cutting Blades (12) to be kept in good condition to cut at its best. The

Landroid

can do most things by itself, but will sometimes need your help to prevent damage to itself.

• Never let the Landroid

travel over gravel.

• Remove or prevent access to obstacles that the Landroid

could accidentally climb on and damage its Blade Turning Disc.

• Remove all debris and foreign objects from your lawn.

6. App

(Only available for some models. Please check Technical Data & Declaration of Conformity for

information specific to each model.)

Your Landroid

is able to connect with smartphone. Using the Landroid

App for your smartphone, you can change your

Landroid

's general settings, and view the machine's status and error messages.

To connect smartphone to your Landroid

Step 1: To download the Landroid

App, use your smartphone to scan the QR code below or download it from Playstore

(Google-Android), AppleStore (Apple-iOS) or our website www.worxlandroid.com.

Step 2: Enter the Landroid

APP, and then follow the instructions to connect to your Wi-Fi.

*The Serial No. can be found at the rear of Landroid

as shown in Fig. H.

NOTE:

1. If your Wi-Fi information changes, Landroid

needs to be re-set according to Step 1 to 2.

2. When Landroid

is located in an area with low or no Wi-Fi signal, instructions sent from the mobile App may not be

executed immediately. Landroid

will receive instructions when it returns to an area with good Wi-Fi signal.

3. For strong Wi-Fi signal to ensure stable connection, it is recommended to install Wi-Fi extenders to cover areas with

weak or no Wi-Fi signal.

7. Boundary Wire Basics

7.1 Pegging the Boundary Wire

Use the Boundary Wire Distance Gauge (20) to set the correct

distance between the wire and the border of your lawn (more than

26cm*).

* This is the recommended distance. The provided distance gauge

ensures proper installation.

If your neighbor also uses a Landroid

, keep a spacing of at least 1

metres between your Boundary Wire and your neighbors.

The Boundary Wire must outline the intended mowing

area exactly. Your Landroid

will become confused by extra bends

or coils of Boundary Wire that are not part of its mowing area (See

Fig. I). If there is excess Boundary Wire after the mowing area has

been outlined, cut it off and store this additional wire in a separate

location. It is important to leave the necessary length where it

connects to the Charging Base so it can be connected and still remain

buried.

Only suitable for iOS

10.0 or higher

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Worx WR110 MI Seite 11

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Worx WR110 MI

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info