Bedienungsanleitung Worx WX170 (Seite 5 von 12) (Englisch)

673235

Zoom out

Zoom in

Vorherige Seite

1/12

Nächste Seite

Lithium-Ion cordless

drill/driver

WX170 WX170.1 WX170.2 WX170.3

WX170.4 WX170.5 WX170.6 WX170.9

1. KEYLESS CHUCK

2. TORQUE ADJUSTMENT RING

3. TWO-SPEED GEAR CONTROL

4. FORWARD/REVERSE ROTATION

CONTROL

5. SOFT GRIP HANDLE

6. BATTERY PACK *

7. BATTERY PACK RELEASE BUTTON

8. ON/OFF SWITCH

9. SIGHT LIGHT

* Not all the accessories illustrated or

described are included in standard delivery.

TECHNICAL DATA

Type

WX170 WX170.1 WX170.2 WX170.3

WX170.4 WX170.5 WX170.6 WX170.9

(1-designation of machinery, representative of

Cordless Drill)

WX170

WX170.1

WX170.2

WX170.3

WX170.4

WX170.5

WX170.6

WX170.9

Voltage

20V Max**

No load speed

0-350/0-1300/min

Number of clutch

positions

15+1

Max torque

30N.m

Chuck capacity

10mm

Max. drilling

capacity

Steel

10mm

Wood

25mm

Machine weight

1.3kg 0.88kg

** Voltage measured without workload. Initial battery

voltage reaches maximum of 20 volts. Nominal

voltage is 18 volts.

NOISE INFORMATION

A weighted sound pressure L

: 68dB(A)

A weighted sound power L

: 79dB(A)

& K

3.0dB(A)

Wear ear protection when sound

pressure is over

80dB(A)

VIBRATION INFORMATION

Vibration total values (triax vector sum) determined

according to EN 60745:

Drilling into

metal

Vibration emission value a

h,D

=2.27m/s²

Uncertainty K = 1.5m/s²

Screw

driving

without

impact

Vibration emission value a

=1.90m/s²

Uncertainty K = 1.5m/s²

The declared vibration total value may be used for

comparing one tool with another, and may also be

used in a preliminary assessment of exposure.

WARNING: The vibration emission value

during actual use of the power tool can differ

from the declared value depending on the

ways in which the tool is used dependant on the

following examples and other variations on how the

tool is used:

How the tool is used and the materials being cut or

drilled.

The tool being in good condition and well

maintained

The use the correct accessory for the tool and

ensuring it is sharp and in good condition.

The tightness of the grip on the handles and if any

anti vibration accessories are used.

And the tool is being used as intended by its design

and these instructions.

This tool may cause hand-arm vibration

syndrome if its use is not adequately managed.

WARNING: To be accurate, an estimation of

exposure level in the actual conditions of use

should also take account of all parts of the operating

cycle such as the times when the tool is switched off

and when it is running idle but not actually doing the

job. This may signiﬁcantly reduce the exposure level

over the total working period.

Helping to minimize your vibration exposure risk.

ALWAYS use sharp chisels, drills and blades.

Maintain this tool in accordance with these

instructions and keep well lubricated (where

appropriate).

If the tool is to be used regularly then invest in anti

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Worx WX170 Seite 5

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info