Bedienungsanleitung Worx WX423 (Seite 11 von 64) (Englisch)

673177

Zoom out

Zoom in

Vorherige Seite

1/64

Nächste Seite

Electric Circular Saw EN

friction, blade binding and kickback.

f) Blade depth and bevel adjusting

locking levers must be tight and

secure before making cut. If blade

adjustment shifts while cutting, it may

cause binding and kickback.

g) Use extra caution when sawing into

existing walls or other blind areas. The

protruding blade may cut objects that can

cause kickback.

SAFETY INSTRUCTIONS

FOR SAWS WITH INNER

PENDULUM GUARD

Lower Guard Function

a) Check lower guard for proper closing

before each use. Do not operate the

saw if lower guard does not move

freely and close instantly. Never

clamp or tie the lower guard into the

open position. If saw is accidentally

dropped, lower guard may be bent.Raise

the lower guard with the retracting handle

and make sure it moves freely and does

not touch the blade or any other part, in all

angles and depths of cut.

b) Check the operation of the lower

guard spring. If the guard and the

spring are not operating properly,

they must be serviced before use.

Lower guard may operate sluggishly due

to damaged parts, gummy deposits, or a

build-up of debris.

c) Lower guard may be retracted

manually only for special cuts such

as "plunge cuts" and "compound

cuts." Raise lower guard by retracting

handle and as soon as blade enters

the material, the lower guard must be

released. For all other sawing, the lower

guard should operate automatically.

d) Always observe that the lower guard

is covering the blade before placing

saw down on bench or ﬂoor. An

unprotected, coasting blade will cause the

saw to walk backwards, cutting whatever is

in its path. Be aware of the time it takes for

the blade to stop after switch is released.

ADDITIONAL SAFETY

RULES FOR YOUR

CIRCULAR SAW

1. Always wear a dust mask, hearing

protection and eye protection.

2. Only use saw blades recommended in the

speciﬁcation.

3. Use only blade diameter(s) in accordance

with the markings.

ADDITIONAL SAFETY

RULES FOR YOUR

CUTTING-OFF MACHINES

a) The guard provided with the tool must

be securely attached to the power

tool and positioned for maximum

safety, so the least amount of wheel

is exposed towards the operator.

Position yourself and bystanders away

from the plane of the rotating wheel.

The guard helps to protect operator from

broken wheel fragments and accidental

contact with wheel.

b) Use only bonded reinforced or

diamond cut-off wheels for your

power tool. Just because an accessory

can be attached to your power tool, it does

not assure safe operation.

C) The rated speed of the accessory

must be at least equal to the

maximum speed marked on the power

tool. Accessories running faster than their

rated speed can break and ﬂy apart.

d) Wheels must be used only for

recommended applications. For

example: do not grind with the side

of cut-off wheel. Abrasive cut-off wheels

are intended for peripheral grinding, side

forces applied to these wheels may cause

them to shatter.

e) Always use undamaged wheel ﬂanges

that are of correct diameter for your

selected wheel. Proper wheel ﬂanges

support the wheel thus reducing the

possibility of wheel breakage.

f) Do not use worn down reinforced

wheels from larger power tools.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Worx WX423 Seite 11

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info