Bedienungsanleitung Worx WX423 (Seite 12 von 64) (Englisch)

673177

Zoom out

Zoom in

Vorherige Seite

1/64

Nächste Seite

Electric Circular Saw EN

Wheels intended for a larger power tool

are not suitable for the higher speed of a

smaller tool and may burst.

g) The outside diameter and the

thickness of your accessory must

be within the capacity rating of your

power tool. Incorrectly sized accessories

cannot be adequately guarded or

controlled.

h) The arbour size of wheels and ﬂanges

must properly ﬁt the spindle of

the power tool. Wheels and ﬂanges

with arbour holes that do not match the

mounting hardware of the power tool will

run out of balance, vibrate excessively and

may cause loss of control.

i) Do not use damaged wheels. Before

each use, inspect the wheels for chips

and cracks. If power tool or wheel is

dropped, inspect for damage or install

an undamaged wheel. After inspecting

and installing the wheel, position

yourself and bystanders away from

the plane of the rotating wheel and

run the power tool at maximum no

load speed for one minute. Damaged

wheels will normally break apart during

this test time.

j) Wear personal protective equipment.

Depending on application, use face

shield, safety goggles or safety

glasses. As appropriate, wear dust

mask, hearing protectors, gloves and

shop apron capable of stopping small

abrasive or workpiece fragments.

The eye protection must be capable of

stopping ﬂying debris generated by various

operations. The dust mask or respirator

must be capable of ﬁltrating particles

generated by your operation. Prolonged

exposure to high intensity noise may cause

hearing loss.

k) Keep bystanders a safe distance away

from work area. Anyone entering

the work area must wear personal

protective equipment. Fragments of

workpiece or of a broken wheel may ﬂy

away and cause injury beyond immediate

area of operation.

I) Hold the power tool by insulated

gripping surfaces only, when

performing an operation where

the cutting accessory may contact

hidden wiring or its own cord. Cutting

accessory contacting a “live” wire may

make exposed metal parts of the power

tool “live” and could give the operator an

electric shock.

m) Position the cord clear of the spinning

accessory. lf you lose control, the cord

may be cut or snagged and your hand or

arm may be pulled into the spinning wheel.

n) Never lay the power tool down until

the accessory has come to a complete

stop. The spinning wheel may grab the

surface and pull the power tool out of your

control.

o) Do not run the power tool while

carrying it at your side. Accidental

contact with the spinning accessory could

snag your clothing, pulling the accessory

into your body.

p) Regularly clean the power tool’s air

vents. The motor’s fan will draw the

dust inside the housing and excessive

accumulation of powdered metal may

cause electrical hazards.

q) Do not operate the power tool near

ﬂammable materials. Sparks could ignite

these materials.

r) Do not use accessories that require

liquid coolants. Using water or other

liquid coolants may result in electrocution

or shock.

KICKBACK AND RELATED

WARNINGS

Kickback is a sudden reaction to a pinched or

snagged rotating wheel. Pinching or snagging

causes rapid stalling of the rotating wheel

which in turn causes the uncontrolled power

tool to be forced in the direction opposite of

the wheel’s rotation at the point of the binding.

For example, if an abrasive wheel is snagged

or pinched by the workpiece, the edge of the

wheel that is entering into the pinch point can

dig into the surface of the material causing

the wheel to climb out or kick out. The wheel

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Worx WX423 Seite 12

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info