Bedienungsanleitung Worx WX424.3 (Seite 14 von 172) (Deutsch, Englisch, Holländisch, Dänisch, Französisch, Italienisch, Portugiesisch, Spanisch, Türkisch, Schwedisch, Norwegisch, Finnisch)

575074

Zoom out

Zoom in

Vorherige Seite

1/172

Nächste Seite

Mini multi-function saw EN

was selected. Always practice in a scrap work

piece to become familiar with this cutting

operation. The selected depth of cut is now

set. When the saw’s blade is manually lowered

(See Fig. Ka, Kb), the blade will be below the

base at the selected depth.

3. ADJUSTING THE 3-POSITION HANDLE

(See Fig. F)

Your saw has handle/motor housing with soft-

grip that adjusts to 3 different cutting angles,

0°, 15°, and 30°. This feature provides more

efﬁcient cutting angles for various applications

and added gripping comfort with maximum

control.

Grasp the handle with one hand and push

the handle adjustment button “IN” to release

the handle for adjustment. Move the handle

forward or backward (See Fig. F) to locate the

3 different positions. When the handle moves

into 1 of the 3 positions the adjustment button

will snap out and the handle will lock into

position. When adjusting the handle, Always

be sure that the button has snapped out and

the handle is locked in position. If the handle

still moves forward or backward, repeat the

process until the handle is locked securely in

position.

WARNING:

Do not operate the

saw if the handle IS not locked in

position and can still move forward or

backward. Failure to lock the handle in 1

of 3 cutting positions could cause loss of

control of saw and result in serious injury.

4. TRIGGER SWITCH (See Fig. G)

To activate the trigger switch to turn the saw

“ON”, place your index and middle ﬁngers

into the molded ﬁnger grip trigger safety

release switch, and the other two ﬁngers on

the trigger paddle (See Fig. G). Squeeze the

ﬁnger grip “back” until it “clicks”, then depress

the trigger paddle to turn the saw “ON”. To

stop the saw, release your grip on the trigger

paddle, and the ﬁnger grip safety release

switch will move back into the “OFF” position.

5. USING THE LASER LIGHT FEATURE

AND LED WORKLIGHT (See Fig. H, I)

WARNING: DO NOT stare into

beam. Only turn laser beam on

when the saw is on the work piece.

Your saw has a built-in laser light. To activate

laser light switch, saw must be plugged into

power source.

a. Do not turn the laser beam on until the saw

is on the work piece.

b. Mark the line of cut on the work piece.

c. Adjust the cutting angle and cutting depth

as needed.

d. Plug in the saw and push the laser switch

forward to turn on the laser.

e. Always shut off the laser light when you

are ﬁnished cutting.

f. Your circular saw has a built-in work light

for better visibility when cutting. To turn

on the LED work light, the saw must be

plugged in. Push the switch from OFF to

LED.

6. STARTING A CUT (See Fig. J,K,L1,L2)

a) Set-up and clamp your work piece and

mark your cut line.

b) Set the handle on the saw to the desired

angle for your cutting application.

c) Set the depth of cut (with corresponding

length of cut).

d) Position the front of the saw’s base onto

the leading end (edge) of the work piece

that is solidly supported. Align the center of

the “V” notch on the front of the base with

the cut line (See Fig. J).

e) Manually release the blade guard release

lever while holding the ﬁnger lift bracket on

the rear of the base (See Fig. Ka, Kb) as you

lower the saw’s handle and blade to the

selected depth.

Make sure the blade is not making

contact with the workpiece.

f) With both hands on the handle, squeeze

the trigger’s molded ﬁnger grip safety

release “backward” while squeezing down

on the paddle switch to turn the saw “On”.

g) Let the blade reach full speed before you

enter the work piece, starting your cut.

h) Press down on the saw, keeping the front

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Worx WX424.3 Seite 14

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info