Bedienungsanleitung Worx WX429 (Seite 13 von 20) (Englisch)

673175

Zoom out

Zoom in

Vorherige Seite

1/20

Nächste Seite

Compact Circular Saw WX429

is covering the blade before placing

saw down on bench or ﬂoor. An

unprotected, coasting blade will cause the

saw to walk backwards, cutting whatever is

in its path. Be aware of the time it takes for

the blade to stop after switch is released.

ADDITIONAL SAFETY

WARNING FOR TILE

CUTTING

a) The guard provided with the tool must

be securely attached to the power

tool and positioned for maximum

safety, so the least amount of wheel is

exposed towards the operator. Position

yourself and bystanders away from the

plane of the rotating wheel. The guard

helps to protect operator from broken

wheel fragments and accidental contact

with wheel.

b) Use only bonded reinforced or

diamond cut-off wheels for your

power tool. Just because an accessory

can be attached to your power tool, it does

not assure safe operation.

c) The rated speed of the accessory

must be at least equal to the

maximum speed marked on the power

tool. Accessories running faster than their

rated speed can break and ﬂy apart.

d) Wheels must be used only for

recommended applications. For

example: do not grind with the side

of cut-off wheel. Abrasive cut-off wheels

are intended for peripheral grinding, side

forces applied to these wheels may cause

them to shatter.

e) Always use undamaged wheel ﬂanges

that are of correct diameter for your

selected wheel. Proper wheel ﬂanges

support the wheel thus reducing the

possibility of wheel breakage.

f) Do not use worn down reinforced

wheels from larger power tools.

Wheels intended for a larger power tool

are not suitable for the higher speed of a

smaller tool and may burst.

g) The outside diameter and the

thickness of your accessory must

be within the capacity rating of your

power tool. Incorrectly sized accessories

cannot be adequately guarded or

controlled.

h) The arbour size of wheels and ﬂanges

must properly ﬁt the spindle of

the power tool. Wheels and ﬂanges

with arbour holes that do not match the

mounting hardware of the power tool will

run out of balance, vibrate excessively and

may cause loss of control.

i) Do not use damaged wheels. Before

each use, inspect the wheels for chips

and cracks. If power tool or wheel is

dropped, inspect for damage or install an

undamaged wheel. After inspecting and

installing the wheel, position yourself and

bystanders away from the plane of the

rotating wheel and run the power tool at

maximum no load speed for one minute.

Damaged wheels will normally break apart

during this test time.

j) Wear personal protective equipment.

Depending on application, use face

shield, safety goggles or safety

glasses. As appropriate, wear dust mask,

hearing protectors, gloves and shop apron

capable of stopping small abrasive or

workpiece fragments. The eye protection

must be capable of stopping ﬂying debris

generated by various operations. The

dust mask or respirator must be capable

of ﬁltrating particles generated by your

operation. Prolonged exposure to high

intensity noise may cause hearing loss.

k) Keep bystanders a safe distance away

from work area. Anyone entering the

work area must wear personal protective

equipment. Fragments of workpiece or of

a broken wheel may ﬂy away and cause

injury beyond immediate area of operation.

l) Hold the power tool by insulated

gripping surfaces only, when

performing an operation where

the cutting accessory may contact

hidden wiring or its own cord. Cutting

accessory contacting a “live” wire may

make exposed metal parts of the power

tool “live” and could give the operator an

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Worx WX429 Seite 13

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info