Bedienungsanleitung Worx WX523 (Seite 12 von 19) (Deutsch, Englisch, Holländisch, Französisch, Italienisch, Spanisch, Polnisch)

575058

Zoom out

Zoom in

Vorherige Seite

1/19

Nächste Seite

20V WORX saw EN

for the equipment.

n) Keep cells and battery pack clean and dry.

o) Wipe the cell or battery pack terminals with

a clean dry cloth if they become dirty.

p) Secondary cells and battery pack need

to be charged before use. Always use

the correct charger and refer to the

manufacturer’s instructions or equipment

manual for proper charging instructions.

q) Do not leave a battery pack on prolonged

charge when not in use.

r) After extended periods of storage, it may

be necessary to charge and discharge the

cells or battery pack several times to obtain

maximum performance.

s) Secondary cells and battery pack give their

best performance when they are operated

at normal room temperature (20 °C ± 5 °C).

t) Retain the original product literature for

future reference.

u) Use only the cell or battery pack in the

application for which it was intended.

v) When possible, remove the battery pack

from the equipment when not in use.

w) Dispose of properly.

SAFETY INSTRUCTIONS

FOR ABRASIVE CUTTING-

OFF OPERATIONS

CUT-OFF MACHINE SAFETY WARNINGS

a) The guard provided with the tool must

be securely attached to the power

tool and positioned for maximum

safety, so the least amount of wheel

is exposed towards the operator.

Position yourself and bystanders away

from the plane of the rotating wheel.

The guard helps to protect operator from

broken wheel fragments and accidental

contact with wheel.

b) Use only diamond cut-off wheels

for your power tool. Just because an

accessory can be attached to your power

tool, it does not assure safe operation.

C) The rated speed of the accessory

must be at least equal to the

maximum speed marked on the power

tool. Accessories running faster than their

rated speed can break and ﬂy apart.

d) Wheels must be used only for

recommended applications. For

example: do not grind with the side of

cut-off wheel. Abrasive cut-off wheels

are intended for peripheral grinding, side

forces applied to these wheels may cause

them to shatter.

e) Always use undamaged wheel ﬂanges

that are of correct diameter for your

selected wheel. Proper wheel ﬂanges

support the wheel thus reducing the

possibility of wheel breakage.

f) Do not use worn down reinforced

wheels from larger power tools.

Wheels intended for a larger power tool

are not suitable for the higher speed of a

smaller tool and may burst.

g) The outside diameter and the

thickness of your accessory must

be within the capacity rating of your

power tool. lncorrectly sized accessories

cannot be adequately guarded or

controlled.

h) The arbour size of wheels and ﬂanges

must properly ﬁt the spindle of

the power tool. Wheels and ﬂanges

with arbour holes that do not match the

mounting hardware of the power tool will

run out of balance, vibrate excessively and

may cause loss of control.

i) Do not use damaged wheels. Before

each use, inspect the wheels for chips

and cracks. If power tool or wheel is

dropped, inspect for damage or install an

undamaged wheel. After inspecting and

installing the wheel, position yourself and

bystanders away from the plane of the

rotating wheel and run the power tool at

maximum no load speed for one minute.

Damaged wheels will normally break apart

during this test time.

j) Wear personal protective equipment.

Depending on application, use face

shield, safety goggles or safety

glasses. As appropriate, wear dust mask,

hearing protectors, gloves and shop apron

capable of stopping small abrasive or

workpiece fragments. The eye protection

must be capable of stopping ﬂying debris

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Worx WX523 Seite 12

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info