Bedienungsanleitung Worx WX671.3 (Seite 10 von 108) (Deutsch, Englisch, Holländisch, Dänisch, Französisch, Italienisch, Portugiesisch, Spanisch, Türkisch, Schwedisch, Norwegisch, Finnisch)

575135

Zoom out

Zoom in

Vorherige Seite

1/108

Nächste Seite

High frequency multi-function tool EN

OPERATION INSTRuCTIONS

NOTE: Before using the tool, read the

instruction book carefully.

INTENDED USE

The power tool is intended for sawing and

separating wooden materials, plastic, plaster,

non-ferrous metals and fasteners (e.g.

nails and clamps) as well as for working on

soft wall tiles and for dry grinding of small

surfaces. It is especially suitable for working

close to edges and for ﬂush cutting.

WARNING: Before working your

tool make sure that no power cords

will be damaged. Unplug your tools before

mounting or replacing accessories.

Do not touch the gear box after long working

time, because it could be hot.

1. MOUNTING THE TOOL (See Fig. A1, A2)

CAUTION: For all work or when

changing application tools, always wear

protective gloves. Avoid danger of injury

from the sharp edges of the application tools.

Application tools can become very hot while

working, presenting danger of burns!

WARNING: To reduce the risk of

injury, do not let the Universal end

cut blades or any segment saw blades

face back toward the user’s hand.

Unscrew the fastening piece (5).

Clean the tool holder, the application tool and

the fastening piece (5).

Place the application tool exactly onto the hex-

shaped tool holder. Note that the application

tool has a ﬂush ﬁt.

Reposition the fastening piece (5) using the

supplied Allen key.

2. USING ADAPTER (19) (See Fig. A3)

Accessories of other brands( Fein

, Bosch

)

can be ﬁtted onto the Sonicrafter

brand tool

using the adapter.

NOTE: Fein is a registered trademark of C. &

E. Fein GmbH. Bosch is a registered trademark

of Robert Bosch GmbH.

1) Use the allen key (21) to unscrew the

fastening piece (5) and then remove it from

the tool holder .

2) Clean the tool holder, the adapter the

application tool and the fastening piece.

3) Fit the adapter onto the tool holder, then

place the application tool onto the adapter.

Make sure that the tool holder, the adaptor,

and the application tool share a ﬂush ﬁt.

Reposition the fastening piece onto the

application tool and tighten with the allen key.

NOTE: Make sure the adapter matches the

application tool. The adapter (I) is matched to

the application tool of Fein

. The adapter (II)

is matched to the application tool of Bosch

(See Fig. A3)

3. MOUNTING/CHANGING THE SANDING

SHEET (See Fig. B1,B2)

Align the sanding sheet and press it onto the

sanding pad by hand.

Firmly press the power tool with the sanding

sheet against a ﬂat surface and brieﬂy switch

the power tool on. This provides for good

adhesion and prevents premature wear.

If one point has become worn, pull off the

sanding sheet, turn it 120° and place it on

again.

4. OPERATING THE ON/OFF SWITCH

To start the machine, push the On/Off switch

(1) forward so that the “I” is indicated on the

switch.

To switch off the machine, push the On/Off

switch (1) toward the rear so that the “0” is

indicated on the switch.

5. USING THE VARIABLE SPEED

CONTROL (WX671 WX671.1 WX671.2

WX671.3 WX671.4 WX671.5 WX671.6

WX671.7 WX671.8 WX671.11)

Select oscillation frequency (speed) while the

motor is running.

The variable speed control (2) can be used

to set the optimum oscillating frequency

according to the accessories used and the

respective application.

High oscillation frequency:

Sanding, sawing, rasping and polishing stone

and metal.

Low oscillation frequency:

Polishing varnishes.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Worx WX671.3 Seite 10

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info