Bedienungsanleitung Xavax 00111932 - MAX Starter Kit (Seite 18 von 42) (Deutsch, Englisch, Holländisch, Französisch, Spanisch)

608044

Zoom out

Zoom in

Vorherige Seite

1/42

Nächste Seite

3.5. Teach-out/Reset

The MAX! Eco Switch can be reset to the initial state

manually. Restoring the initial state deletes all settings and information about taught-in devices.

• First remove the batteries from the battery compartment.

• Wait 60 seconds.

• Press and hold down the button at the top or bottom.

• Re-insert the batteries at the same time.

• Pr

ess and hold down the button until the device LED starts to ash. Release the button. The factory settings are restored.

3.6. LED ashing sequences and transmission behaviour

The LED’s ashing sequences have different meanings:

3.7. Mounting in existing switches

The MAX! Eco Switch is designed to t into frames supplied by the following manufacturers:

3.8. Technical data

Supply voltage:

3 V

Batteries: 2x LR03 (micro/AAA)

Battery life: 5 years approx.

Receiver frequency: 868.3 MHz

Receiver class: SRD Class 2

Typical range of transmission

in the open air: 100 m

Housing dimensions: 86 x 86 x 16.5 mm (W x H x D)

Subject to technical changes.

3.9. Safety instructions

This device is not a toy; do not allow children to play with it. Do not leave packaging material lying around, as it can be

dangerous in the hands of a child. Do not open the device: it does not contain any components that need to be serviced

by the user. In the event of an error, please return the device to our service department.

3.10. Note on environmental protection:

After the implementation of the European Directive 2002/96/EU and 2006/66/EU in the national legal system, the following

applies:

Electric and electronic devices as well as batteries must not be disposed of with household waste. Consumers are

obliged by law to return electrical and electronic devices as well as batteries at the end of their service lives to the

public collecting points set up for this purpose or point of sale. Details to this are dened by the national law of the

respective country. This symbol on the product, the instruction manual or the package indicates that a product is

subject to these regulations. By recycling, reusing the materials or other forms of utilising old devices/Batteries, you are

making an important contribution to protecting our environment.

Hereby, Hama GmbH & Co. KG, declares that this 00111932 is in compliance with the essential requirements and other

relevant provisions of Directive 1999/5/EC. See www.hama.com for declaration of conformity according to R&TTE Directive

99/5/EC guidelines.

Flashing sequence Meaning

1x ash Conrmation following successful sending of the radio command

2x ashes Duty cycle has been exceeded. The longest period to wait before sending again would be an hour.

3x ashes Error message, radio command not sent successfully

Manufacturer Frame

Berker S.1, B.1, B.3, B.7 glass

ELSO Joy

GIRA System 55, Standard 55, E2, E22, Event, Espirit

merten 1-M, Atelier-M, M-Smart, M-Arc, M-Star, M-Plan

JUNG A 500, AS 500, A plus, A creation

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Xavax 00111932 - MAX Starter Kit Seite 18

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info