Bedienungsanleitung Xenyx X1832USB xenyx x1832usb (Seite 9 von 19) (Holländisch)

751068

Zoom out

Zoom in

Vorherige Seite

1/19

Nächste Seite

9XENYX X2442USB/X2222USB/X1832USB/X1622USB User Manual

AUX SEND (FX)

The AUX SEND (FX) jack carries the master aux mix (from the channel’s FX

controls). You can connect this to an external eects device to process the FX bus.

The processed signal can then be brought from the eects device back into the

STEREO AUX RETURN jacks.

2.3.3 Stereo aux return connectors

X2442USBX1832USB

Fig. 2.9: The aux return connectors

◊ On the X2222USB, X1832USB and X1622USB the STEREO AUX RETURN

jacks are located on the front panel of the unit.

STEREO AUX RETURN

The STEREO AUX RETURN 1 jacks generally serve as the return for the eects

mix (created using the post-fader aux sends) by connecting the output of an

external eects device. If only the left jack is connected, the AUX RETURN is

automatically switched to mono.

◊ You can also use these jacks as additional line inputs.

All stereo aux returns are balanced, but can of course also be used with

unbalanced connectors. If you use an aux send for monitoring, theassociated

unused stereo aux returns are available for other line level signals

(e.g.keyboards).

◊ A signal fed into the stereo return jacks can be output via an aux

send jack. More information on this can be found in chapter 2.3.5

“STEREO AUX RETURN 1/2 (TO AUX SEND)”.

STEREO AUX RETURN FX

The STEREO AUX RETURN FX jacks accept the eects mix return (created using

the channel FX sends). If these jacks are already in use as additional inputs,

youcan route the eects signal back into the console via a dierent channel.

Theadvantage of this is that you can now use that channel’s EQ on the eects

return signal.

◊ In this instance, the FX control of the channel being used as an effects

return should be turned fully counterclockwise, otherwise feedback

problems could occur!

◊ If you wish to use the internal effects processor, do not plug any

connectors into the STEREO AUX RETURN FX jacks, unless you want to

tap the processed signal via the FX OUT (X2222USB and X2442USB only).

2.3.4 The monitor section of the X1832USB

One of the ways that the X1832USB diers from the other models of this series is

that it has a separate monitor output.

X1832USB

Fig. 2.10: Monitor output of the X1832USB

The rst aux send (MON) on this console is used to set up the monitor mix from

the channels and route it to the MON SEND fader.

X1832USB

Fig. 2.11: Monitor fader of the X1832USB

MUTE

Press the MUTE switch to mute the monitor send.

SOLO

The SOLO switch routes the monitor send to the solo bus (post-fader and post-

mute) or to the PFL bus (pre-fader and pre-mute). The position of the MODE

switch in the main section determines which of the buses is selected.

2.3.5 Stereo aux return control

STEREO AUX RETURN 1

The STEREO AUX RETURN 1 control determines the level of this signal in the

main mix. If STEREO AUX RETURN 1 is used as eects return, this will determine

the level of the eects when mixed with any “dry” channel signal.

◊ When used in this way, the effects device should be set at 100% effect.

X2442USB

Fig. 2.12: Stereo aux return and stereo aux return (to aux send) controls

STEREO AUX RETURN 1/2 (TO AUX SEND)

The two right-hand STEREO AUX RETURN controls have a special function:

they can be used to add an eect to a monitor mix. An example follows

(X1622USBwired to an eects device):

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Xenyx X1832USB xenyx x1832usb Seite 9

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info