Bedienungsanleitung Xerox DocuMate 4440 (Seite 159 von 181) (Englisch)

484152

159

Zoom out

Zoom in

Vorherige Seite

1/181

Nächste Seite

Xerox DocuMate 4440

User’s Guide

159

Troubleshooting

Problem: The scanner won’t scan. What’s wrong?

Check for one of these possible causes:

• Are the cables loose or not plugged in securely? Inspect the cable connections. Make sure the

cables are plugged in securely.

• Is the scanner’s status light on? Turn on the scanner’s power. If the status light doesn’t come on,

plug the power supply into another electrical outlet. If you are using a UPS battery back-up or

power strip, try plugging the scanner directly to a wall outlet.

• Did you restart the computer and scanner? If the scanner gets a paper jam, or looses connection

because of an error, try restarting your computer and power cycling the scanner.

• Did you plug the scanner into a USB hub? If you’re using a USB hub to connect the scanner try

plugging the scanner’s USB cable directly to the back of the computer. It is not recommended that

you use the scanner with a USB hub, if you are using a hub, the hub must have its own power

supply.

• Is the USB cable 6’ or less? If you are using a USB cable that is longer than 6’ you may lose

connection to the scanner. The recommended USB cable length is 6’ or less, the USB cable

provided with your scanner is within this range.

• Did you select another image source in the scanning software? If you use multiple imaging

devices with your computer, such as a camera, all-in-one printer, or another scanner, you may have

selected another source for images. Make sure Xerox DocuMate 4440 is selected as the scanner.

Problem: The scanned images are of poor quality. What do I do?

There are various reasons why the scanned image is of poor quality. The original document may not be

of good quality, the scanner glass may be dirty, or a shading adjustment may be needed.

• If the original is crinkled, torn, dirty or smudge, try scanning from the Kofax Virtual ReScan (VRS™)

software. VRS is a powerful image enhancement application that you can use to filter this type of

noise from the document during image processing. The resulting image is of a quality equal or

greater to the original.

• Try cleaning the scanner. The scanner glass is where the image is captured as the page is pulled

through the scanner.

Problem: I got an “SVS001” error when installing Kofax VRS. What do I do?

The message “SVS001: The VRS installation does not install an ISIS driver for the scanner you selected.

Please install the ISIS driver packaged with your scanner.” is not an error message. Please click on OK to

finish the installation.

This is a message informing you that the software does not install an ISIS driver. This is the correct

behavior of the Kofax VRS software, the ISIS driver for your scanner was installed when you chose an

ISIS installation option when installing the scanner driver.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Xerox DocuMate 4440 Seite 159

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Xerox DocuMate 4440

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info