Bedienungsanleitung Xiaomi Roborock Robot Vacuum Cleaner (Seite 5 von 13) (Englisch)

730175

Zoom out

Zoom in

Vorherige Seite

1/13

Nächste Seite

Setting

Start cleaning

When the ashing ring-shaped indicator starts to glow constantly, it means that the

charging of the device is completely completed. Press the Power button, or use the mobile

application to turn on the cleaning of the room.

Attention:

- Do not turn on the wet cleaning function when there is no one at home;

- It is recommended to rinse the nozzle for wet cleaning every 30 minutes of its use to

ensure a high-quality and ecient cleaning.

Removing the wet cleaning module

After the vacuum cleaner has cleaned the

necessary room and returned to the docking

station, grip the handles on both sides with

special clips and pull the module toward you.

Attention:

- If the vacuum cleaner is being charged or

not being used, remove the module for wet

cleaning from the device.

- If you installed the docking station on a

wooden oor, we strongly recommend that

you use a waterproof mat to avoid damage to the oor as a result of water leakage.

On/O

Press the Power button, then the ring-shaped indicator will light up. The device is ready for

use. If the vacuum cleaner is in the process of cleaning, press and hold the Power button

to turn it o, after which the unit stops cleaning.

Attention: do not turn o the vacuum cleaner during recharging.

Cleaning

Press the Power / Cleaning button to start cleaning the room.

During cleaning, press any button on the device to pause it.

Attention:

- If the device’s charge level is too low, the vacuum cleaner will not clean the room. First

charge the device.

- If there is a signicant decrease in charge during cleaning, the vacuum cleaner will

automatically return to the docking station for recharging. When the vacuum cleaner is

charged to the required level, the device will automatically continue cleaning the room.

- Before switching on the cleaning mode, please remove all excess cables from the oor

(including the dock cable) so that the vacuum cleaner does not get tangled in the cables

during cleaning, as this may result in power failure, damage to the devices and damage to

the cables.

- If the cleaning time is less than 10 minutes, by default the device cleans the room twice.

Charging

Automatic mode: after cleaning, the vacuum cleaner automatically returns to the docking

station for recharging.

Manual mode: when the device is paused, press the Charging button to return the device

to the docking station for recharging.

During charging, an annular indicator ashes around the device.

Caution: If the device does not automatically nd the dock, transfer the vacuum cleaner to

the docking station by yourself.

Cleaning method

After turning on the device, the vacuum cleaner scans the room map and separates

it to the zones. In each zone cleaning begins along the walls, after which the vacuum

cleaner forms its route in a certain zone «along the serpentine», consistently qualitatively

removing the entire room. After cleaning the room, the vacuum cleaner automatically

returns to the docking station for recharging.

Cleaned zone 1 Cleaned zone 2

Cleaning zone 4 Cleaning zone 3

(not cleaned yet) (in process)

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Xiaomi Roborock Robot Vacuum Cleaner Seite 5

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info