Bedienungsanleitung Xoro HSD 8550 (Seite 59 von 142) (Deutsch, Englisch)

497010

Zoom out

Zoom in

Vorherige Seite

1/142

Nächste Seite

HSD 8550 13

English

Connection

Video Output

Connecting with a VIDEO (CVBS) cable

The video (CVBS) cable transmits the signals for brightness (Y-signal) and colour (C-signal) in a

combined way. You should only use this connection if no other connection type can be used. Plug a

cable into the VIDEO (CVBS) socket on the rear side of your DVD player. The other side of the

cable must be connected to the VIDEO input socket of the TV-set (usually labelled “VIDEO IN” or

“AV IN”. Please also refer to your TV set’s user manual). As VIDEO (CVBS) does not transmit

sound, you also must add an audio connection.

Insert one end of the supplied audio (Cinch [RCA]) cable into the white/red Cinch [RCA] socket L/R

AUDIO OUT at the back of the DVD player and the other end into the audio input socket (usually

white/red) on the TV set (usually labelled “AUDIO IN” or “AV IN”. Please also refer to your TV set’s

user manual)

Switch on the TV set and select the s-video input or the respective channel number. For channel

number and input selection please also refer to your TV operating instructions.

Connecting with a S-Video cable

S-Video (S-VHS) cable transmits the signals for brightness (Y-signal) and colour (C-signal)

separately. This connection type offers a better picture quality as CVBS or SCART connection. Plug

a cable into the s-video socket on the rear side of your DVD player. The other side of the cable

must be connected to the s-video input socket of the TV-set (usually labelled “S-VIDEO IN” or

“SVHS IN”. Please also refer to your TV set’s user manual). As S-Video does not transmit sound,

you also must add an audio connection.

Insert one end of the supplied audio (Cinch [RCA]) cable into the white/red Cinch [RCA] socket L/R

AUDIO OUT at the back of the DVD player and the other end into the audio input socket (usually

white/red) on the TV set (usually labelled “AUDIO IN” or “AV IN”. Please also refer to your TV set’s

user manual).

Switch on the TV set and select the s-video input or the respective channel number. For channel

number and input selection please also refer to your TV operating instructions.

Connecting with a SCART cable

The SCART or Euro AV cable serves as the universal connector for picture, sound and control

signals. Plug a cable into the SCART socket at the back of the DVD player and the SCART IN

socket on the rear side of the TV set. Please also refer to your TV set’s user manual. Switch on the

TV set and select the SCART input or the respective channel number. For channel number and

input selection please also refer to your TV operating instructions.

Note:

The SCART interface of this DVD recorder is RGB enabled. In RGB mode, the picture quality is

much better than in standard SCART mode. You can activate RGB mode on the video settings

page of your DVD recorder. You only can use this mode if it is supported by your TV set. Otherwise,

the use of RGB will result in wrong colour display. Please also refer to your TV set’s user manual.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Xoro HSD 8550 Seite 59

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info