Bedienungsanleitung Xterra TR6.5 (Seite 18 von 24) (Englisch)

587183

Zoom out

Zoom in

Vorherige Seite

1/24

Nächste Seite

TR6.5 Treadmill

How to wear your wireless chest strap transmitter:

1. Attach the transmitter to the elastic strap using the locking parts.

2. Adjust the strap as tightly as possible as long as the strap is not too tight to remain comfortable.

3. Position the transmitter with the logo centered in the middle of your body facing away from your

chest (some people must position the transmitter slightly left of center). Attach the final end of the

elastic strap by inserting the round end and, using the locking parts, secure the transmitter and

strap around your chest.

4. Position the transmitter immediately below the pectoral muscles.

5. Sweat is the best conductor to measure very minute heart beat electrical signals. However,

plain water can also be used to pre-wet the electrodes (2 black square areas on the reverse side

of the belt and either side of transmitter). It’s also recommended that you wear the transmitter

strap a few minutes before your work out. Some users, because of body chemistry, have a more

difficult time in achieving a strong, steady signal at the beginning. After “warming up”, this problem

lessens. As noted, wearing clothing over the transmitter/strap doesn’t affect performance.

6. Your workout must be within range - distance between transmitter/receiver – to achieve a strong

steady signal. The length of range may vary somewhat but generally stay close enough to the

console to maintain good, strong, reliable readings. Wearing the transmitter immediately against

bare skin assures you of proper operation. If you wish, you may wear the transmitter over a shirt.

To do so, moisten the areas of the shirt that the electrodes will rest upon.

Note: The transmitter is automatically activated when it detects activity from the user’s heart. Additionally, it

automatically deactivates when it does not receive any activity. Although the transmitter is water resistant, moisture

can have the effect of creating false signals, so you should take precautions to completely dry the transmitter after

use to prolong battery life (estimated transmitter battery life is 2500 hours). The replacement battery is Panasonic

CR2032.

Erratic Operation:

Caution! Do not use this treadmill for Heart Rate Control unless a steady, solid Actual Heart

Rate value is being displayed. High, wild, random numbers being displayed indicate a

problem.

Areas to look at for interference:

(1) Treadmill not properly grounded – Proper grounding is a must!

(2) Microwave ovens, TV’s, small appliances, etc.

(3) Fluorescent lights.

(4) Some household security systems.

(5) Perimeter fence for a pet.

(6) Loose bolts on the treadmill console or upright tubes.

(7) The antenna that picks up your heart rate is very sensitive. If there is an outside noise

source, like a radio/cell tower or high tension electric power lines, turning the whole machine 90

degrees may de-tune the interference.

WARNING!

DO NOT USE THE HEART RATE CONTROL PROGRAM IF YOUR HEART RATE IS NOT

REGISTERING PROPERLY ON THE TREADMILL’S DISPLAY!

Using a Heart Rate Transmitter

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Xterra TR6.5 Seite 18

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info