674768
40
Zoom out
Zoom in
Vorherige Seite
1/173
Nächste Seite
40
Basic Operation
Performing Communication
y Fixing the Communication Mode
To fix the transmission mode for operation, touch [MODE] to switch the communication
mode.
Touching [MODE] each time toggles the communication mode as follows.
[
(AMS)] → [DN (V/D mode)] → [VW (FR mode)] → [FM (analog)]
Operation mode Icon Description of Modes
AMS
(Automatic Mode Select)
The transmit mode is automatically selected from the 4 types,
corresponding to the received signal.
(The “DN” part of the icon differs depending on the type of the
received signal.)
By touching [TX DN], you can change the AMS function operation.
TX M: Automatically selects one of the 4 communication modes
according to the received signal. Briefly pressing PTT on
the microphone switches between digital mode and analog
mode.
TX FM: Automatically selects one of the 4 communication modes
according to the received signal. Always switches to FM
mode for transmission.
TX DN: Automatically selects one of the 4 communication modes
according to the received signal. Always switches to DN
mode for transmission.
TX VW: Automatically selects one of the 4 communication modes
according to the received signal. Always switches to VW
mode for transmission.
AUTO: Automatically selects one of the 4 communication modes
according to the received signal.
V/D Mode
(Voice/Data simultaneous
transmission mode)
DN Calls are less prone to interruptions due to detection and correction
of voice signals during digital voice signal transmission. This is the
standard mode for C4FM FDMA Digital.
Voice FR Mode
(Voice Full Rate Mode)
VW High speed data communication using entire 12.5 kHz band.
Enables high-quality voice communication.
Data FR Mode (High Speed
Data Communication Mode)
DW Digital voice data transmission using the entire 12.5 kHz band.
The transceiver automatically switches to this mode during image
transmission.
Analog FM Mode FM Analog communication using FM mode.
Effective when the signal is weak and audio is susceptible to
interruption in digital mode.
Caution
In V/D mode (“DN” on the LCD), position information is included in the radio wave during voice
communication, however, position information is not included in the Voice FR mode (“VW” on the LCD).
Transmitting/Receiving Signals
1
While pressing and holding , speak into the microphone.
Keep your mouth about 5 cm away from the microphone when you speak.
2 Release .
The transceiver returns to receive mode.
40

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Yaesu FT2DR wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info