674768
41
Zoom out
Zoom in
Vorherige Seite
1/173
Nächste Seite
41
Basic Operation
Performing Communication
Cautions
y Use the transceiver at the minimum required transmit power level. Doing so prevents the transceiver
from overheating and saves battery power, increasing the operating time.
y Do not continue transmitting for a prolonged period. The transceiver can overheat, resulting in
malfunction or a burn injury.
y If transmission is continued for a long period, the transceiver overheats and the high temperature
protection function is activated. As a result, the transmitting power level is automatically set to Low
Power. If you continue transmitting while the high temperature protection function is active, the
transceiver will be forcibly returned to the receive mode.
y If you touch the transceiver immediately after the high temperature protection function has become
active, you may be burned. Wait for the temperature inside the transceiver to cool sufficiently before
resuming transmission.
y Do not start transmitting without attaching the antenna. The transmitter circuit can be damaged.
Tips
In FM mode, you can transmit on the 144 MHz and 430 MHz ham radio bands.
Even while receiving in AM mode, transmit will continue to be in NFM mode when pressing
.
The transmit power level may be changed by touching [F MW] followed by [TXPWR] (
see page
46).
Transmit power level settings are different when using the chargeable battery pack, or using the
alkaline battery case.
For more details, see “Turning on the Transceiver” on page 32.
If
is pressed when a frequency other than the amateur ham radio band is selected, an alarm tone
(beep) will be emitted and “ERROR” appears on the LCD, disabling transmission.
The transceiver may be set to inhibit transmit while receiving a signal. Press and hold
key
for over one second to activate Set mode, then rotate the DIAL to the setting from [CONFIG] [2
BCLO], and then select [ON].
41

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Forenregeln

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Art des Missbrauchs:

Zum Beispiel antisemitische Inhalte, rassistische Inhalte oder Material, das zu einer Gewalttat führen könnte.

Beispielsweise eine Kreditkartennummer, persönliche Identifikationsnummer oder unveröffentlichte Privatadresse. Beachten Sie, dass E-Mail-Adressen und der vollständige Name nicht als private Informationen angesehen werden.

Forenregeln

Um zu sinnvolle Fragen zu kommen halten Sie sich bitte an folgende Spielregeln:

Neu registrieren

Registrieren auf E - Mails für Yaesu FT2DR wenn:


Sie erhalten eine E-Mail, um sich für eine oder beide Optionen anzumelden.


Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Wenn Sie innerhalb von 15 Minuten keine E-Mail mit dem Handbuch erhalten haben, kann es sein, dass Sie eine falsche E-Mail-Adresse eingegeben haben oder dass Ihr ISP eine maximale Größe eingestellt hat, um E-Mails zu erhalten, die kleiner als die Größe des Handbuchs sind.

Ihre Frage wurde zu diesem Forum hinzugefügt

Möchten Sie eine E-Mail erhalten, wenn neue Antworten und Fragen veröffentlicht werden? Geben Sie bitte Ihre Email-Adresse ein.



Info