Bedienungsanleitung Yamaha 01V96i (Seite 21 von 71) (Englisch)

517047

Zoom out

Zoom in

Vorherige Seite

1/71

Nächste Seite

Selecting Layers 21

01V96i—Owner’s Manual

Operating Basics

Confirmation Messages

For certain functions, the 01V96i prompts you for con-

firmation before executing the functions, as shown here.

Move the cursor to YES and press [ENTER] to execute

the function, or move the cursor to NO and press

[ENTER] to cancel.

If you take no action for awhile, the confirmation win-

dow closes automatically and the function is not exe-

cuted.

Title Edit Window

The Title Edit window enables you to enter titles for

Scene and library memories. You can enter 4, 12, or 16

characters, depending on the item.

The figure on the left shows uppercase characters and

various punctuation marks. The figure on the right

shows lowercase characters and numbers.

Use the cursor buttons to select characters, and press

the [ENTER] button to enter them into the title. The

cursor moves to the right automatically as each charac-

ter is entered. Use the Parameter wheel to move the cur-

sor within the title.

Use the SHIFT LOCK button to select uppercase or

lowercase characters, and use the SPC button to enter a

space.

To insert a space at the cursor position and move sub-

sequent characters to the right, move the cursor to the

INS button and press [ENTER].

To delete the character at the cursor position and move

subsequent characters to the left, move the cursor to the

DEL button and press [ENTER].

When you have finished, move the cursor to the OK

button, then press [ENTER] to confirm the title. To

cancel the title entry, move the cursor to the CANCEL

button, then press [ENTER].

Selecting Layers

Input Channels and Output Channels (Bus Outs & Aux

Outs) are arranged into layers, as illustrated below.

There are four layers altogether.

The currently-selected

layer determines the

function of the channel

strip, [SEL] buttons,

[SOLO] buttons, [ON]

buttons, and faders. Use the LAYER buttons to select a

layer you wish to edit using the channel strip controls.

The following table shows the layers that you can access

using the LAYER buttons, and the parameters you can

control using the channel strips on each layer.

LAYER

buttons

Layers

Channel Strips

1–8 9–16

[1–16]

button

Input Channel

Layer 1–16

Input Channels 1–16

[17–32]

button

Input Channel

Layer 17–32

Input Channels 17–32

[REMOTE]

button

Remote Layer

Operation depends on the

selected target.

[MASTER]

button

Master Layer

Aux Send

masters 1–8

Bus Out mas-

ters 1–8

Tip:

• The function of each channel strip fader depends on the

currently-selected Fader mode (see page 22).

• The STEREO [SEL] button, [ON] button, and [STE-

REO] fader always control the Stereo Out signal, regard-

less of the Layer settings.

• The ST IN [SEL] buttons, [SOLO] buttons, [ON] but-

tons, and level control knobs always adjust the ST IN

channels selected via the [ST IN] button regardless of the

Layer settings.

Input Channel Layer 17–32

Input Channel Layer 1–16

Remote Layer

Master Layer

1-16 17-32 MASTER REMOTE

LAYER

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Yamaha 01V96i Seite 21

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Yamaha 01V96i

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info