Bedienungsanleitung Yamaha 01V96i (Seite 22 von 71) (Englisch)

517047

Zoom out

Zoom in

Vorherige Seite

1/71

Nächste Seite

22 Operating Basics

01V96i—Owner’s Manual

Selecting Channels

To select a channel on the 01V96i,

press the corresponding [SEL]

button. To adjust the Pan and EQ

settings, use the rotary controls in

the SELECTED CHANNEL sec-

tion. To select a channel on pages

that cover multiple channels, press

the corresponding [SEL] button.

1. Press the corresponding

LAYER button to select a

layer that includes the

desired channel (see

page 21).

To select ST IN channels, press

the [ST IN] button.

2. Use the corresponding [SEL] button to

select the desired channel.

The channel is selected and the [SEL] button indi-

cator lights up.

The Channel’s ID and short name appear in the

upper-left corner of the display. If the currently-dis-

played page contains a relevant channel parameter,

the cursor moves to that parameter automatically. If

the currently-displayed page contains no such

parameter, a page that does contain such a parame-

ter is selected automatically.

3. To select the Stereo Out, press the STE-

REO [SEL] button.

Repeatedly pressing the STEREO [SEL] button tog-

gles between the Stereo Out left and Stereo Out

right channels.

If the currently-displayed page contains a relevant

Stereo Out parameter, the cursor moves to that

parameter automatically. If the currently-displayed

page contains no such parameter, a page that does

contain such a parameter is selected automatically.

Selecting Fader Modes

The function of channel faders (1–16) depends on the

selected Layer and Fader mode.

1. Select a layer that includes the desired

channel (see page 21).

2. Press the FADER MODE buttons to select

a Fader mode.

The button indicators identify the following Fader

modes:

• When the [HOME] button indicator lights up:

You can use channel faders to control Input Chan-

nels and ST IN Channel levels or Output Channels

(Aux Out 1–8, Bus Out 1–8) master levels.

• When one of the [AUX1]–[AUX8] button indica-

tors light up:

You can use channel faders to control the corre-

sponding Aux Send level.

The following table shows the channel fader functions

for each Layer and Fader mode.

Tip: For paired Input or Output Channels, the channel

for which you pressed the [SEL] button is selected, and

its indicator lights up. The [SEL] button indicator of

the paired partner flashes.

HIGH

HIGH-MID

LOW-MID

LOW

FREQUENCY

GAIN

LAYER

buttons

Fader Mode

Channel Strip Fader

1–8 9–16

[1–16]

button

[HOME] button Input Channel 1–16 level

[AUX1]–[AUX8]

buttons

Input Channel 1–16 Aux

Send level

[17–32]

button

[HOME] button Input Channel 17–32 level

[AUX1]–[AUX8]

buttons

Input Channel 17–32 Aux

Send level

[REMOTE]

button

[HOME] button

Operation depends on the

selected target.

[AUX1]–[AUX8]

buttons

[MASTER]

button

[HOME] button

Aux Send

master 1–8

output level

Bus Out

master1–8

output level

[AUX1]–[AUX8]

buttons

No operation

Note: You cannot select the [AUX1]–[AUX8] buttons

while the Master layer is selected. If you switch to the Mas-

ter layer while one of the [AUX1]–[AUX8] button indica-

tors is lit, the indicator automatically turns off and the

[HOME] button indicator lights up.

FADER MODE

AUX 1 AUX 2 AUX 3 AUX 4

AUX 8AUX 7AUX 6AUX 5

HOME (METER)

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Yamaha 01V96i Seite 22

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Yamaha 01V96i

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info