Bedienungsanleitung Yamaha 01V96i (Seite 29 von 71) (Englisch)

517047

Zoom out

Zoom in

Vorherige Seite

1/71

Nächste Seite

Input and Output Patching 29

01V96i—Owner’s Manual

Connections

and Setup

Input and Output

Patching

The 01V96i is designed to enable you to patch (assign)

signals to Inputs and Outputs. This section explains

how to view the signals patched to Inputs and Outputs

and change the assignment.

Patching Input Channels

By default, the Input Channels are patched as follows:

• INPUT connectors 1–16....Input Channels 1–16

• ADAT IN channels 1–8......Input Channels 17–24

• Slot channels 1–8.................Input Channels 25–32

• Outputs 1–2 of Internal

Effects Processor 1–4 .........ST IN Channels 1–4

Follow the steps below to view or change the patching.

1. Press the DISPLAY ACCESS [PATCH] but-

ton repeatedly until the following page

appears.

Inputs and Slot channels that are currently assigned

to Input Channels are shown in the parameter

boxes (

1) beneath the channel numbers. The

parameter indicators are explained below:

• – ...................................No assignment

• AD1–AD16 ...............INPUT connectors 1–16

• USB 1–USB 16.......... TO HOST USB port chan-

nels 1–16

• ADAT1–ADAT8 ......ADAT IN channels 1–8

• SL-01–SL-16..............Slot channels 1–16

• FX1-1–FX1-2............Outputs 1–2 of Internal

Effects Processor 1

• FX2-1–FX2-2............Outputs 1–2 of Internal

Effects Processor 2

• FX3-1–FX3-2 ............Outputs 1–2 of Internal

Effects Processor 3

• FX4-1–FX4-2 ............Outputs 1–2 of Internal

Effects Processor 4

• 2TD-L/R.....................2TR IN DIGITAL L/R con-

nectors

Follow the steps below to view or change the patching.

2. Use the cursor buttons to move the cur-

sor to a patch parameter (

1) for which

you want to change the assignment, and

rotate the Parameter wheel or press the

[INC]/[DEC] buttons to modify the

patching.

3. Press [ENTER] to confirm the change.

Patching Omni Outs

By default, the output connectors are patched as follows:

• OMNI OUT connectors 1–4.... Aux Out 1–4

• ADAT OUT channels 1–8......... Bus Out 1–8

• Slot channels 1–8 ........................ Bus Out 1–8

• Slot channels 9–16...................... Bus Out 1–8

• 2TR DIGITAL connectors........ Stereo Out L & R

Follow the steps below to view or change the patching.

1. Press the DISPLAY ACCESS [PATCH] but-

ton repeatedly until the following page

appears.

Tip: If the data from a connected instrument fails to be

input, or if you are unable to monitor the signal at the

desired output, check the I/O patching, as explained below:

Tip: To restore the default patching, recall Input Patch

memory #00.

Tip:

• The STEREO OUT connectors always output the Stereo

Bus signals.

• The MONITOR OUT connectors output monitor sig-

nals or the 2TR IN signals, depending on the Monitor

Source selector setting.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Yamaha 01V96i Seite 29

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Yamaha 01V96i

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info