Bedienungsanleitung Yamaha 02R (Seite 339 von 354) (Englisch)

517050

339

Zoom out

Zoom in

Vorherige Seite

1/354

Nächste Seite

228 Glossary

Digital Recording Console 02R User’s Guide

Expander – An expander is another form of automatic level control. By

attenuating the signal below the threshold, the expander reduces low-level

noise or expands the dynamic range of the recorded material. See Dynamics

Processor

F (frequency) – The center frequency of an equalizer band. See Equalizer.

Fader calibration – The motorized faders occasionally require

re-calibration in order to maintain the highest performance possible.

G (gain) – The signal gain of an equalizer band. See Equalizer.

Gain and 20dB (pad) – The analog input pre-ampliﬁer controls. These

controls are used to optimize the signal from the input connectors. The pad

switch is used to reduce the channel gain for line level signals.

Gate – A gate, or noise gate is an audio switch used to mute signals below a

set threshold level. It can be used to suppress background noise and hiss

from valve (tube) amps, effects pedals, and microphones. See Dynamics

Processor.

IEC958 Part-2 (Consumer) – A digital interface protocol that is used to

transfer digital audio data between consumer-type digital audio

equipment such as CD players and DAT , DCC, and Mini Disc recorders.

Two channels of digital audio (left/right) are carried on a single line. A

coaxial phono/RCA jack connection is typical, but some systems use

optical interconnects.

IEC958 Part-3 (AES/EBU - Professional) – A digital interface protocol that

is used to transfer digital audio data between professional digital audio

equipment such as PCM and DAT mastering recorders, modular

multitrack recorders and other equipment. Two channels of digital audio

are carried on a single line. An XLR-type connector and a shielded cable is

typically used.

Internal Effects – The 02R is equipped with two internal multi-effects

stereo processors. These processors have a startling range of special effects

available to apply to your mix – shimmering reverbs, clean, precise delays,

ﬂanging and chorus, and a myriad of other effects are available.

Metering – The 02R features comprehensive signal level metering. The

mono and stereo input channels, the tape and effect returns, and the

auxiliary sends and buses are all metered using the METER display

function. The control room output is metered using the dedicated

21-segment LED meters. Peak hold is available for all meters.

MIDI implementation – MIDI is an acronym for Musical Instrument

Digital Interface. It is an international standard that allows electronic

musical instruments to communicate with each other. Because of the

complexity of the 02R, it only recognizes MIDI Program Change, Parameter

Change, and System Exclusive messages. It uses System Exclusive

messages to provide bulk data transfers as well as controller changes. It

also reads MTC (MIDI timecode). See Timecode.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Yamaha 02R Seite 339

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Yamaha 02R

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info