Bedienungsanleitung Yamaha 02R (Seite 341 von 354) (Englisch)

517050

341

Zoom out

Zoom in

Vorherige Seite

1/354

Nächste Seite

230 Glossary

Digital Recording Console 02R User’s Guide

Routing – The process of assigning input or tape and effect returns to the

output buses or the stereo bus.

Sampling frequency – The rate at which measurements of an audio signal

are taken during A/D and D/A conversion. Once in the digital domain, the

data usually remains at the same sampling frequency. The measure is

samples per second.

Scene Memory – The 02R scene memories are a memory location used to

store a snapshot of virtually all the digital parameters of the mixer. Settings

that are not stored consist mainly of monitor controls, analog controls, and

switches. The 02R has 64 mix scene memory locations. Each can be named

for easy identiﬁcation.

Shelving – An equalizer circuit that is used to cut and boost a signal above

or below a speciﬁed frequency. High and low band equalizers are usually

shelving type. The 02R equalizer can be conﬁgured as shelving or peaking.

Signal to Noise ratio (S/N) – The difference between the nominal signal

level and the residual noise ﬂoor, usually expressed in decibels.

System Exclusive – A MIDI message that is used to transmit data between

MIDI devices that is exclusive to those devices. Bulk dump data can be sent

from any device to a MIDI data ﬁler. Controller events are transmitted

between 02Rs using System Exclusive messages. See also Bulk Dump.

Talkback System – A system that allows the engineer in the control room

to talk to the musicians in the studio.

Timecode –Timecode is a signal that contains a chronological record of the

absolute time in a recording. It is used for synchronizing different

recorders. It can be used for electronic editing. Timecode was initially

invented for the motion picture business, as a method of synchronizing the

pictures recorded in the frames of a camera to the sound recorded on tape

recorder.

The 02R supports three types of timecode, SMPTE timecode, MTC (MIDI

timecode), and Internal timecode

White noise – A random noise that contains an equal amount of energy per

frequency band. That is, 100–200, 800–900, and 3000–3100. Pink noise has

an equal amount of energy per octave. The bands 100–200, 800–1600, and

3000–6000 all contain the same amount of energy.

Word – One sample of audio data. In the 02R, a word is 20-bits.

Wordclock – Wordclock is a sync pulse which allows devices to determine

where the start of each digital word is. When multiple digital devices are

connected together, it is vital that each device knows where a digital word

starts and stops. Otherwise dropout or distortion may result. Although

most digital interconnect protocols are self-clocking, it is more reliable to

use a dedicated line for your wordclock signal. This is especially important

in a multitrack environment where up to eight channels of digital data may

be multiplexed on one cable.

Missbrauch melden von Frage und/oder Antwort

Libble nimmt den Missbrauch seiner Dienste sehr ernst. Wir setzen uns dafür ein, derartige Missbrauchsfälle gemäß den Gesetzen Ihres Heimatlandes zu behandeln. Wenn Sie eine Meldung übermitteln, überprüfen wir Ihre Informationen und ergreifen entsprechende Maßnahmen. Wir melden uns nur dann wieder bei Ihnen, wenn wir weitere Einzelheiten wissen müssen oder weitere Informationen für Sie haben.

Yamaha 02R Seite 341

Brauchen Sie Hilfe? Stellen Sie Ihre Frage.

Missbrauch melden von Frage und/oder Antwort

Art des Missbrauchs:

Forenregeln

Neu registrieren

Andere Handbücher von Yamaha 02R

Das Handbuch wird per E-Mail gesendet. Überprüfen Sie ihre E-Mail.

Ihre Frage wurde zu diesem Forum hinzugefügt

Info